[Asterisk-bsd] Asterisk on NetBSD.

[pyrotek]

> -----Original Message-----
> From: asterisk-bsd-bounces at lists.digium.com 
> [mailto:asterisk-bsd-bounces at lists.digium.com] On Behalf Of 
> Robin-David Hammond %KB3IEN
> Sent: Saturday, 19 August 2006 12:03 PM
> To: Asterisk on BSD discussion
> Subject: [Asterisk-bsd] Asterisk on NetBSD.
> 
> 
> 
> I tried gcc 3.3.3 with devel/ncurses installed via pksrc.But 
> the linker seems to not see it.
> 
> 
> This is asterisk 1.2.10 not the 1.2.9.1 in pkgsrc.
> 
> Any one had any success with asterisk on netbsd?


Yes on  Cube  running 2.0
> 
> 
> gcc -c -o buildinfo.o  -pipe  -Wall -Wstrict-prototypes 
> -Wmissing-prototypes -Wmissing-declarations -g3  -Iinclude 
> -I../include -I/usr/pkg/include -D_REENTRANT -D_GNU_SOURCE  
> -O6 -I/usr/local/include -L/usr/local/lib  -pthread 
> -fomit-frame-pointer  buildinfo.c gcc -g3  -o asterisk -Wl,-E 
>  io.o sched.o logger.o frame.o loader.o config.o channel.o 
> translate.o file.o say.o pbx.o cli.o md5.o term.o ulaw.o 
> alaw.o callerid.o fskmodem.o image.o app.o cdr.o tdd.o acl.o 
> rtp.o manager.o asterisk.o dsp.o chanvars.o indications.o 
> autoservice.o db.o privacy.o astmm.o enum.o srv.o dns.o 
> aescrypt.o aestab.o aeskey.o utils.o plc.o jitterbuf.o 
> dnsmgr.o devicestate.o netsock.o slinfactory.o ast_expr2.o 
> ast_expr2f.o cryptostub.o buildinfo.o editline/libedit.a 
> db1-ast/libdb1.a stdtime/libtime.a -lncurses -lm -lpthread 
> -lcrypto -lm -L/usr/pkg/lib -lncurses -lssl
> ld: cannot find -lncurses
> gmake: *** [asterisk] Error 1
> 
> 

I had the same error I needed to change the GCC optimization right down  I
also had to do this for the GSM codec If I remember correctly.

It all works now quite fine 
I did try and submit a diff but it did not seem to go anywhere
> 
> 
> On Thu, 17 Aug 2006, Robin-David Hammond %KB3IEN wrote:
> 
> > Date: Thu, 17 Aug 2006 01:31:40 +0000 (UTC)
> > From: Robin-David Hammond %KB3IEN <asterisk at kb3ien.us>
> > Reply-To: Asterisk on BSD discussion <asterisk-bsd at lists.digium.com>
> > To: asterisk-bsd at lists.digium.com
> > Subject: [Asterisk-bsd] asterisk-1.2.9.1 from pkgsrc.
> > 
> > 
> > This is a build from pkgsrc. It apears that the -arch option is not 
> > understood.
> > 
> > This is a mono-processor system.
> > 
> > cpu0 at mainbus0: 603ev (Revision 2.1), ID 0 (primary)
> > cpu0: HID0 90c001<DOZE,DPM,ICE,DCE,NOPTI>
> > cpu0: ohare L2 cache enabled
> > 
> > The logicboard is a PowerComputing Valkyrie, the OS is netbsd-3.0.1
> > 
> > i would expect -mpowerpc and -mcpu=603 in this case. Any 
> suggestions?
> > 
> > 
> > /usr/include/pthread.h:306:1: warning: this is the location of the 
> > previous definition In file included from codec_gsm.c:40:
> > ../include/asterisk/lock.h:653:1: warning: "pthread_cond_destroy" 
> > redefined In file included from ../include/asterisk/lock.h:26,
> >                 from codec_gsm.c:40:
> > /usr/include/pthread.h:311:1: warning: this is the location of the 
> > previous definition In file included from codec_gsm.c:40:
> > ../include/asterisk/lock.h:654:1: warning: "pthread_cond_signal" 
> > redefined In file included from ../include/asterisk/lock.h:26,
> >                 from codec_gsm.c:40:
> > /usr/include/pthread.h:307:1: warning: this is the location of the 
> > previous definition In file included from codec_gsm.c:40:
> > ../include/asterisk/lock.h:655:1: warning: "pthread_cond_broadcast" 
> > redefined In file included from ../include/asterisk/lock.h:26,
> >                 from codec_gsm.c:40:
> > /usr/include/pthread.h:308:1: warning: this is the location of the 
> > previous definition In file included from codec_gsm.c:40:
> > ../include/asterisk/lock.h:656:1: warning: "pthread_cond_wait" 
> > redefined In file included from ../include/asterisk/lock.h:26,
> >                 from codec_gsm.c:40:
> > /usr/include/pthread.h:309:1: warning: this is the location of the 
> > previous definition In file included from codec_gsm.c:40:
> > ../include/asterisk/lock.h:657:1: warning: "pthread_cond_timedwait" 
> > redefined In file included from ../include/asterisk/lock.h:26,
> >                 from codec_gsm.c:40:
> > /usr/include/pthread.h:310:1: warning: this is the location of the 
> > previous definition /usr/local/bin/gmake -C gsm lib/libgsm.a
> > gmake[2]: Entering directory
> > `/usr/pkgsrc/comms/asterisk/work/asterisk-1.2.9.1/codecs/gsm'
> > if [ ! -d ./lib ] ; then mkdir ./lib ; fi gcc -O2 -I/usr/include  
> > -pipe  -Wall -Wstrict-prototypes -Wmissing-prototypes 
> > -Wmissing-declarations -g3  -Iinclude -I../include 
> -I/usr/local/include
> > -D_REENTRANT -D_GNU_SOURCE   -I/usr/local/include 
> -L/usr/local/lib  -pthread 
> > -fomit-frame-pointer  -fPIC -I/usr/local/include 
> -L/usr/local/lib  -c
> > -DNeedFunctionPrototypes=1 -funroll-loops -march=powerpc 
> -fPIC -DSASR 
> > -DNDEBUG    -DWAV49   -I./inc src/add.c
> > cc1: error: invalid option `arch=powerpc'
> > gmake[2]: *** [src/add.o] Error 1
> > gmake[2]: Leaving directory
> > `/usr/pkgsrc/comms/asterisk/work/asterisk-1.2.9.1/codecs/gsm'
> > gmake[1]: *** [gsm/lib/libgsm.a] Error 2
> > gmake[1]: Leaving directory
> > `/usr/pkgsrc/comms/asterisk/work/asterisk-1.2.9.1/codecs'
> > gmake: *** [subdirs] Error 1
> > *** Error code 2
> > 
> > 
> > 
> > 
> > Robin-David Hammond     KB3IEN
> > +1 347 350 34 00
> > 
> > _______________________________________________
> > Asterisk-BSD mailing list
> > Asterisk-BSD at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> >
> 
> 
> Robin-David Hammond     KB3IEN
> +1 347 350 34 00
> 
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd