[Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI

Wed May 25 00:52:52 CDT 2005

Yes,

please have a look at my port, you need to install 

http://www.shellbang.org/files/liblinuxcapi.tar.gz

too. Maybe the used archive is no longer available, so pls contact me
and I will put that on my site, too.

Jan

-----Original Message-----
> Date: Tue, 24 May 2005 18:34:33 +0200
> Subject: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI
> From: Chris Stenton <jacs at gnome.co.uk>
> To: asterisk-bsd at lists.digium.com

> Ok,
> 
> _cword is defined in capiutils.h which is not part of c4b nor your
> port.
> There is a copy in the isdn4k-utils is that what you used?
> 
> Chris
> 
> 
> On Tue, 2005-05-24 at 16:17 +0100, Chris Stenton wrote:
> 
> > Yes I patched 5.4 for c4b and it seems to work.
> > 
> > 
> > you can get the new chan_capi version  from here
> > 
> >
http://www.junghanns.net/asterisk/downloads/chan_capi-0.4.0-PRE1.tar.gz
> > 
> > The only thing I am stuck on is what the def for _cword is which I
> > notice is still in your port.
> > If I get time I will have a more detailed look.
> > 
> > Chris
> > 
> > ----- Original Message -----
> > From: <Jan.Stocker at t-online.de>
> > To: <asterisk-bsd at lists.digium.com>
> > Sent: Tuesday, May 24, 2005 1:40 PM
> > Subject: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI
> > 
> > 
> > 
> > > Only small changes needed...
> > > 
> > > the original LINUX version had some wrong coded lines (like
> > > reading from the writing side of a pipe, that is working on LINUX
> > > because they are using unix sockets for pipe implementation) that
> > > should be fixed by Mr.
> > > Junghanns (i sent him the patches).
> > > Additionally you need to use some CAPI4BSD headers, i try to make
> > > a patch for 0.4 if you tell me where to download from (pls gimme
> > > some days, cause my development notebook has burned out and I need
> > > to code on my server :( ).
> > > 
> > > Do you have C4B already installed?
> > > 
> > > Jan
> > > 
> > > 
> > > -----Original Message-----
> > > From: asterisk-bsd-bounces at lists.digium.com
> > > [mailto:asterisk-bsd-bounces at lists.digium.com] On Behalf Of Chris
> > > Stenton
> > > Sent: Tuesday, May 24, 2005 1:17 PM
> > > To: Asterisk on BSD discussion
> > > Subject: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI
> > > 
> > > Jan,
> > > 
> > > Have you tried CHAN_CAPI.0.4.PRE1 I notice it has some FreeBSD
> > > support in chan_capi.c. I can't use your port as I run CVS head
> > > which needs the newer version. I can't compile this newer version
> > > with asterisk cvs head. What should I redfine _cword to be?
> > > 
> > > Chris
> > > 
> > > 
> > > On Tue, 2005-05-24 at 07:47 +0200, Jan.Stocker at t-online.de wrote: 
> > > > Hi,
> > > > 
> > > > you can use any AVM active card (e.g. AVM B1 for a single BRI)
> > > > and chan_capi for this purpose.
> > > > You need my ports found on http://www.shellbang.org
> > > > 
> > > > Jan
> > > > 
> > > > 
> > > > -----Original Message-----
> > > > 
> > > > > Date: Mon, 23 May 2005 21:42:09 +0200
> > > > > Subject: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI
> > > > > From: Cian Hughes <cianlists at cian.ws>
> > > > > To: asterisk-bsd at lists.digium.com
> > > > 
> > > > > Hello all, I am new to this list and to asterisk but am a long
> > > > > time BSD user (though rather lacking in Linux knowledge) and
> > > > > would like 
> > > to
> > > > > install Asterisk on a spare box to act as a PBX at home,
> > > > > basically I'm going to route most of my calls over IP, but for
> > > > > incoming, emergency, toll free, faxes, etc I want to use ISDN
> > > > > (EuroISDN I'm in Ireland).
> > > > > I have one sticking point, I don't really want four BRIs so
> > > > > the quadBRI seems like overkill. However I'm still undecided
> > > > > on what 
> > > card
> > > > > to buy, since this is nothing mission critical I would
> > > > > initially 
> > > like
> > > > > to start with a cheap passive card, and if all doesn't go well
> > > > > i'll buy something better. Anyway could I please have everyone
> > > > > and anyone's experience of ISDN on FreeBSD, what cards are
> > > > > supported, what cards work well?
> > > > > 
> > > > > Also has any one managed Direct Inward Dialling rules with
> > > > > ISDN and Asterisk on freebsd (I have 4 MSN's that I would like
> > > > > to use)? 
> > > > > Yours Gratefully, Cian.
> > > > > _______________________________________________
> > > > > Asterisk-BSD mailing list
> > > > > Asterisk-BSD at lists.digium.com
> > > > > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> > > > > 
> > > > 
> > > > 
> > > > _______________________________________________
> > > > Asterisk-BSD mailing list
> > > > Asterisk-BSD at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> > > --
> > > 
> > > _______________________________________________
> > > Asterisk-BSD mailing list
> > > Asterisk-BSD at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> > > 
> > > 
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > Asterisk-BSD mailing list
> > > Asterisk-BSD at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> > > 
> > 
> > _______________________________________________
> > Asterisk-BSD mailing list
> > Asterisk-BSD at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> --
> 
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd