[Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI

[Chris Stenton]

Yes I patched 5.4 for c4b and it seems to work.


you can get the new chan_capi version  from here

http://www.junghanns.net/asterisk/downloads/chan_capi-0.4.0-PRE1.tar.gz

The only thing I am stuck on is what the def for _cword is which I notice is 
still in your port.
If I get time I will have a more detailed look.

Chris

----- Original Message ----- 
From: <Jan.Stocker at t-online.de>
To: <asterisk-bsd at lists.digium.com>
Sent: Tuesday, May 24, 2005 1:40 PM
Subject: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI


> Only small changes needed...
>
> the original LINUX version had some wrong coded lines (like reading from
> the writing side of a pipe, that is working on LINUX because they are
> using unix sockets for pipe implementation) that should be fixed by Mr.
> Junghanns (i sent him the patches).
> Additionally you need to use some CAPI4BSD headers, i try to make a
> patch for 0.4 if you tell me where to download from (pls gimme some
> days, cause my development notebook has burned out and I need to code on
> my server :( ).
>
> Do you have C4B already installed?
>
> Jan
>
>
> -----Original Message-----
> From: asterisk-bsd-bounces at lists.digium.com
> [mailto:asterisk-bsd-bounces at lists.digium.com] On Behalf Of Chris
> Stenton
> Sent: Tuesday, May 24, 2005 1:17 PM
> To: Asterisk on BSD discussion
> Subject: Re: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI
>
> Jan,
>
> Have you tried CHAN_CAPI.0.4.PRE1 I notice it has some FreeBSD support
> in chan_capi.c. I can't use your port as I run CVS head which needs the
> newer version. I can't compile this newer version with asterisk cvs
> head. What should I redfine _cword to be?
>
> Chris
>
>
> On Tue, 2005-05-24 at 07:47 +0200, Jan.Stocker at t-online.de wrote:
>> Hi,
>>
>> you can use any AVM active card (e.g. AVM B1 for a single BRI) and
>> chan_capi for this purpose.
>> You need my ports found on http://www.shellbang.org
>>
>> Jan
>>
>>
>> -----Original Message-----
>> > Date: Mon, 23 May 2005 21:42:09 +0200
>> > Subject: [Asterisk-bsd] Asterisk on FreeBSD + ISDN BRI
>> > From: Cian Hughes <cianlists at cian.ws>
>> > To: asterisk-bsd at lists.digium.com
>>
>> > Hello all, I am new to this list and to asterisk but am a long time
>> > BSD user (though rather lacking in Linux knowledge) and would like
> to
>> > install Asterisk on a spare box to act as a PBX at home, basically
>> > I'm going to route most of my calls over IP, but for incoming,
>> > emergency, toll free, faxes, etc I want to use ISDN (EuroISDN I'm in
>> > Ireland).
>> > I have one sticking point, I don't really want four BRIs so the
>> > quadBRI seems like overkill. However I'm still undecided on what
> card
>> > to buy, since this is nothing mission critical I would initially
> like
>> > to start with a cheap passive card, and if all doesn't go well i'll
>> > buy something better. Anyway could I please have everyone and
>> > anyone's experience of ISDN on FreeBSD, what cards are supported,
>> > what cards work well?
>> >
>> > Also has any one managed Direct Inward Dialling rules with ISDN and
>> > Asterisk on freebsd (I have 4 MSN's that I would like to use)?
>> >
>> > Yours Gratefully, Cian.
>> > _______________________________________________
>> > Asterisk-BSD mailing list
>> > Asterisk-BSD at lists.digium.com
>> > http://lists.digium.com/mailman/listinfo/asterisk-bsd
>>
>>
>> _______________________________________________
>> Asterisk-BSD mailing list
>> Asterisk-BSD at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-bsd
> -- 
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>
>
>
>
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>