[Asterisk-bsd] Sipura SPA 3000 Config...

[Chris Stenton]

in my case

exten => _8.,1,Dial(SIP/${EXTEN:1}@homesipurabox)

sip.conf 

[homesipurabox]
nat=no
;reinvite=no
;canreinvite=no
type=friend
host=192.168.123.19
disallow=all
allow=alaw
allow=ulaw
dtmfmode=rfc2833
port=5061
context=home-in
mailbox=203

on the sipura under pstn line

voip to pstn gateway enabled yes
voip caller auth method none
one stage dialing yes
voip caller default dp none


Chris


On Fri, 2005-03-18 at 12:29 +1100, Ian Welch wrote:
> Mornin',
> 
> I am pretty new to the Asterisk setup and have it working pretty well
> with 20 sip phones, 2 IAXy boxes and a 4 port digium card. (2 x FXS, 2
> x FXO) I have even reused some of my old sipPhone box's to add my
> house and the bosses place to the PBX.
> 
> All is well and Asterisk on FreeBSD seems quite stable in using the
> latest ports.  Anyways I just got a new Sipura SPA 3000.  Seems kinda
> cool and works as any other extention would however I can't seem to
> get it to work as a VOIP -> PSTN gateway.
> 
> Don't suppose anyone would know the correct config so I can get
> Asterisk to dial out via this PSTN line?
> 
> I assume it is just a stuff up in my config.  Asterisk can't register
> with the sipura spa.
> 
> If any one knows how could they give me a register line for sip.conf
> and where do I set this up in the Sipura Web interface?
> 
> Any help would be appreciated.
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
--