[Asterisk-bsd] Not having any luck getting Asterisk to answer a TDM400P FXO module

[Jeff Rizzo]

This needs to be a FAQ, I think.  :)

Try recompiling the wcfxs driver with AUDIO_RINGCHECK *not* defined. 
Not sure why this is the default.

#undef AUDIO_RINGCHECK

+j

Mark Radabaugh wrote:

> Running FreeBSD 5.3 / Zapata / Asterisk built from ports (updated
> first) from a week ago.  The TDM400P has 4 FXO cards in it.
>
> I can get Asterisk to dial out on the POTS lines but can not get it to
> answer incoming calls - unless I manually 'break' the loop by pulling
> a wire off at the jack (basically creating a 'flash' on the line).
> Once I do that Asterisk answers the phone and plays the demo that I
> would expect.
> At one point we had the incoming line running through the office fax
> machine.  I expected that Asterisk would answer the phone before the
> fax machine did (the fax rings a few times before answering) but no
> go.  When we would hang up the fax machine after deciding this was not
> going to work Asterisk would show itself (console) answering the phone.
>
> I have tried Loop Start, Ground Start (hum.. can't get Asterisk to
> start with that) and KoolStart and all give the same results.  I'm
> running out of ideas.
>
> Anyone have any ideas?
>
> Thanks,
>
> Mark Radabaugh
> Amplex
>
>
> asterisk# cat zaptel.conf
> fxsks=1-4
> loadzone = us
> defaultzone=us
> asterisk#
>
> asterisk# cat zapata.conf
> [channels]
> language=en
> group=1
> pickupgroup=1
> context=incoming
> signalling=fxs_ks
> usecallerid=no
> hidecallerid=no
> callwaiting=no
> callwaitingcallerid=no
> threewaycalling=no
> transfer=yes
> cancallforward=no
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> immediate=yes
> musiconhold=default
> channel => 1-4
>
> [channels]
> language=en
> group=2
> pickupgroup=1
> context=outgoing
> signalling=fxs_ks
> usecallerid=no
> hidecallerid=no
> callwaiting=no
> callwaitingcallerid=no
> threewaycalling=no
> transfer=yes
> cancallforward=no
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> immediate=yes
> musiconhold=default
> channel => 2-4
>

_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSD at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd



-- 
Jeff Rizzo                                         riz at redcrowgroup.com
Red Crow Group LLC                                
http://www.redcrowgroup.com/
+1 415 550 0310