[Asterisk-bsd] Zaptel TE405P/FreeBSD Problem

[Konstantin Prokazoff]

Are this card V1 or V2?
V2 cards aren't supported now by zaptel-fbsd drivers.

----- Original Message ----- 
From: "Richard E. Neese" <r.neese at gmail.com>
To: <armand at armie.net>; "Asterisk on BSD discussion"
<asterisk-bsd at lists.digium.com>
Sent: Thursday, July 21, 2005 4:39 PM
Subject: Re: [Asterisk-bsd] Zaptel TE405P/FreeBSD Problem


> did you make sure the card is not sharing a irq ?
>
> On July 21, 2005 02:35 pm, Armand Sulter wrote:
> > We just installed a TE405P, the lights on the
> > card go in 'knight rider' mode as expected, the
> > bios detects the card as 'Simple Comm' device and
> > assigns it an IRQ, however Freebsd does not pick
> > it up at all.
> >
> > - 'dmesg' shows no signs of the card at all, not even the
> >   irq the bios had assigned to the card.
> > - We've tried a different machine with no luck.
> > - The card seems to work fine under Linux(centos)
> >
> > System Specs :
> >
> > - SuperMicro X5DPA-TGM+ Dual Xeon Motherboard
> > - FreeBSD 5.4 (smp) (Tried it without smb as well)
> > - Zaptel zaptel-0.10 Drivers
> >
> >
> > Does anyone have any ideas on this ?
> >
> > Armand,
> >
> > Armand at Armie dot Net
> > _______________________________________________
> > Asterisk-BSD mailing list
> > Asterisk-BSD at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-bsd
>
> -- 
> Open your eyes to life and look at all
> the wounderfulcolors the Gods gave us.
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>