[Asterisk-bsd] TDM400P Rev E/F, "Module not installed"

[Mahlon E. Smith]

I've been running Asterisk in the office here for a little over a year
on a debian machine - I'm *overjoyed* that the zaptel drivers are now
functional under FreeBSD.

With that said, I'm seeing an issue that I don't think is
(mis)configuration (based on the configs on my debian boxes).  3 out
of 4 of the ports on my TDM400P are dead - dmesg claims "Module not
installed".  (Yes, it has the power cable plugged in. :)

I see a related post a few months prior, noting that the problem was
fixed.  Did it just not filter to the ports tree as of yet?

Relevent info I could think to include is below - any info on how to get
this working is appreciated!

% dmesg
kernel: Zapata Telephony Interface Registered on major 196
kernel: ZapTel device: vendor=e159 device=1 subvendor=8085
kernel: wcfxo0: <Wildcard X101P> port 0xa400-0xa4ff mem 0xde001000-0xde001fff irq 20 at device 10.0 on pci2
kernel: ZapTel Attach for wcfxo0: deviceID : 0xe159
kernel: wcfxo0: [GIANT-LOCKED]
kernel: wcfxo: DAA mode is 'FCC'
kernel: Found a Wildcard FXO: Wildcard X101P
kernel: ZapTel device loaded.
kernel: FXS device: vendor=e159 device=1 subvendor=b100
kernel: wcfxs0: <Wildcard TDM400P REV E/F> port 0xa000-0xa0ff mem 0xde000000-0xde000fff irq 21 at device 7.0 on pci2
kernel: FXS Attach for wcfxs0: deviceID : 0xe159
kernel: wcfxs0: [GIANT-LOCKED]
kernel: Freshmaker version: 63
kernel: Freshmaker passed register test
kernel: Module 0: Installed -- AUTO FXS
kernel: Module 1: Not installed
kernel: Module 2: Not installed
kernel: Module 3: Not installed
kernel: Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
kernel: Registered tone zone 0 (United States / North America)

% kldstat | egrep '(zap|wcf)'
11    3 0xc24da000 2e000    zaptel.ko
12    1 0xc2508000 5000     wcfxo.ko
13    1 0xc279d000 9000     wcfxs.ko

% cat /usr/local/etc/zaptel.conf
fxsks=1
fxoks=2-5
loadzone = us
defaultzone=us

% pciconf -l | grep wcf
wcfxs0 at pci2:7:0:	class=0x078000 card=0x0003b100 chip=0x0001e159 rev=0x00 hdr=0x00
wcfxo0 at pci2:10:0:	class=0x078000 card=0x00038085 chip=0x0001e159 rev=0x00 hdr=0x00

% ztcfg -vv
Keyword: [fxsks], Value: [1]
Keyword: [fxoks], Value: [2-5]
Keyword: [loadzone], Value: [us]
Keyword: [defaultzone], Value: [us]

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Slaves: 04)
Channel 05: FXO Kewlstart (Default) (Slaves: 05)

5 channels configured.





Mahlon E. Smith                      jabber id: mahlon at chat.martini.nu
http://www.martini.nu/             get pgp key:  mahlon-pgp at martini.nu
......................................................................
                Damned if you do.  Bored if you don't.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 155 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-bsd/attachments/20050105/f459e15c/attachment.pgp