[Asterisk-bsd] Stumped again on incoming ring ...

[Jerry Bednyak]

I had the exact same problem last week. Try compiling
the wcfxs.c file with the following line commented
out:

#define AUDIO_RINGCHECK 1

This fixed things for me.

Jerry


--- Lane <lane at joeandlane.com> wrote:

> Hi bsd!
> 
> I purchased a Wildcard TDM11B, 1 fxo/1fxs, back in
> December but had to return 
> it because it sent the Telco line "off hook" the
> instant I plugged it in.
> 
> I have received the replacement, and I can now make
> outgoing calls from a 
> handset plugged into port 1 via SIP/IAX2 and/or via
> the Telco line on port 4.
> 
> My problem now is that asterisk won't answer an
> incoming call on port 4.
> 
> If I use ztmonitor I can see about 12 "bars" while
> an incoming call is ringing 
> the line, but when asterisk is running there is no
> acknowledgement that the 
> line is ringing.  Even with verbose up to 10000
> asterisk does not even 
> mention channel Zap/4-1 unless I am bridging an
> outgoing call from Zap/1-1.
> 
> There was one time, last Friday, when the phone rang
> (my room mate calling in) 
> and I picked it up, forgetting that asterisk was
> running, and seconds into 
> the call asterisk DID pickup.  But other than that
> one time it has not 
> answered.
> 
> Is there maybe something specific to FreeBSD that
> would account for this 
> craziness?
> 
> I'm on FreeBSD 5.3-RELEASE using asterisk 1.0.3_1
> and zaptel 0.8_1
> 
> Below is some of the relevent config.
> 
> I've contacted digium for guidance, but they have
> not yet responded.
> 
> Thanks for any pointers
> 
> lane
> 
> ;zaptel.conf
> fxsks=4
> fxoks=1
> loadzone = us
> defaultzone=us
> 
> ;zapata.conf
> [channels]
> language=en
> busydetect=yes
> busycount=6
> cidsignalling=bell
> cidstart=ring
> callerid=asreceived
> 
> ; this section is for the fxs port (telephone
> instrument)
> context=default
> ;rxwink=300
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> threewaycalling=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
> immediate=no
> signalling => fxo_ks
> channel => 1
> 
> ; this section is for the fxo port (pstn line)
> context=incoming
> ;context=incoming <==== where to send incoming calls
> within extensions.conf
> ;rxwink=300
> usecallerid=no		; not supported by the Telco line
> hidecallerid=no
> callwaiting=no		; not supported by the Telco line
> usecallingpres=no	; not supported by the Telco line
> threewaycalling=no	; not supported by the Telco line
> cancallforward=no	; not supported by the Telco line
> callreturn=no		; not supported by the Telco line
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
> immediate=yes
> echotraining=yes
> signalling => fxs_ks
> channel => 4
> 
> ; extensions.conf
> [incoming]
> exten => s,1,Answer
> exten => s,2,DigitTimeout,5
> exten => s,3,ResponseTimeout,10
> exten => s,4,Playback(tt-weasels) ; do this for
> testing 
> 
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-bsd
>