[Asterisk-bsd] Hello List :) New to Asterisk not new to FreeBSD

[Alex Ayala]

I believe there is not support for zaptel drivers on freebsd just yet.
Maybe I¹m wrong.


On 12/3/05 1:16 PM, "webmasterb" <webmasterb at gmail.com> wrote:

> 
> Hello fellow asteriskers (can i say that?)
> 
> My name is Brian.  I'm looking to setup asterisk on a 1.1GB machine with 256MB
> of RAM Using an X100P wildcard (clone? i ordered the devices on EBay). When up
> and running I would like to use this machine with my Vonage VOIP connection.
> To support my young educational non-profit org -> shameless plug
> www.parkday.org <http://www.parkday.org/> .
> 
> I have been reading about asterisk for about one month now. I have purchased
> the O'reilly Book "Asterisk: The Future of Telephony" and have read about half
> of it.
> 
> First attempt at running asterisk on FreeBSD 6.0 RELEASE resulted in a core
> dump anytime I tried to run asterisk from the cmd line. Poking around I read
> somewhere?? that asterisk is not quite ready for 6.0 RELEASE just yet.  Upon
> reading this I went and re-installed the OS with version 5.4 RELEASE.
> 
> First thing I did after re-installing my OS is re-copiled my kernel to remove
> all extraneous devices, everything is ok so far.
> 
> Now I downloaded all the asterisk (main sounds addons) source code from digium
> ftp site placed them in /usr/src.
> 
> Then I went into the /usr/ports and installed bison gmake and libpri.
> 
>> >From there went to the zaptel ports directory to install the zaptel drivers
>> from there... Here's where things start to get sticky?
> 
> patrick#   make clean && make && make install
> 
> install seemed to be completed ok
>  
>  patrick#  /usr/local/etc/rc.d/zaptel.sh start
> kldload: can't load %%PREFIX%%/lib/zaptel/zaptel
> .ko: No such file or directory
> 
> Here's where I'm lost?  On my first attempt using 6.0-RELEASE zaptel started
> up fine at boot time and even recognized both X100P cards?
> 
> So I wondered . . . Do I need to install asterisk before I tried to run the
> zaptel drivers?  So I went into /usr/src/asterisk-1.0.10 and ran:
> 
> patrick#  gmake clean && gmake && gmake install
> 
> All seemed to go well there, So I ran:
> 
>  patrick#  /usr/local/etc/rc.d/zaptel.sh start
> 
> Which resulted in the same error as before.  So now I'm really stumped!
> 
> 
> Any assistance with my conundrum would be greatly appreciated.
> 
> 
> 
> Thanx
> 
> bb
> 
>  
> #-#-#-#-#
> 
> 
> 
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-bsd/attachments/20051203/a0484403/attachment.htm