[Asterisk-bsd] H323 channel driver is not capable to make outgoing calls

[Konstantin Prokazoff]

Welcome!

    Thereof we have using PWLib 1.9.1 & OpenH323 1.17.2. All compiles fine,
but there are many errors/bugs/memory leakage in code of chan_h323.c, - for
beginning erroneous handling of channel(s) start, cause channel driver runs
RTP when H323 stack signalling haven't finished. And as addition, I suggest
to change in pwlib/make/ptbuildopts.mak, ENDLDLIBS += -lpthread ...
to -pthread for 5.3 or higher FBSD.

Best regards, Konstantin Prokazoff
Center Of Excellence, SVR Ltd., Kyiv HQs, Ukraine
Official business-partner & DevConnect member of Avaya, Inc.
tel. +38 044 244 11 81, fax. +38 044 234 04 55

----- Original Message -----
From: "Dmitriy Belonozhkin" <dan at tdata.ru>
To: "Kirk Davis" <Kirk.Davis at epsb.ca>
Cc: "'Asterisk on BSD discussion'" <asterisk-bsd at lists.digium.com>
Sent: Tuesday, April 19, 2005 9:38 AM
Subject: Re[2]: [Asterisk-bsd] H323 channel driver is not capable to make
outgoing calls


> Hello Kirk,
>
> Monday, April 18, 2005, 9:03:13 PM, you wrote:
>
> KD> I have ported the new OpenH323 and PWLib over to FreeBSD and
> KD> created the ports for them. I'm still testing (I only finished
> KD> them on Friday) so you are welcome to give them a try and see how
> KD> it works for you.
>
> Well your ports have been compiled under FreeBSD v5.4-STABLE without
> any problems.
>
> KD> I have not yet tried them with Asterisk
>
> But it is not possible to build asterisk-1.0.7 with your ports. There
> is huge number of errors when it starts to compile the H323 channel
> driver. It seems that the problem is the same i.e. a version mismatch
> :-(
>
> *[skipped]*
>
> ---
> Best regards,
>  Dmitriy Belonozhkin
>  TeleDATA Engineering LLC (Orel, Russia)
>  Phone: +7-086-2-499931 (ext. 206)
>  mailto:dan at tdata.ru
>  http://www.tdata.ru/
>
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>