[Asterisk-bsd] Re: Asterisk-BSD Digest, Vol 9, Issue 5

[A. Sila]

Hi Andrew,

Thanks for the reaction. The situation remains the same. As soon as I try to get the FXO module configured Asterisk stops running.
No matter how I call that module (3 or 4) it simply doesn't work; and reports the error mentioned in my previous email, which is 
 ERROR[517]: Unable to register channel '4'
WARNING[517]: chan_zap.so: load_module failed, returning -1
WARNING[517]: Loading module chan_zap.so failed!

Please note that "ztcfg -vvv" correctly maps  all 3 channels, 1-2 as FXS and 3 (or event. 4) as FXO .

<<Confirm how many modules are on the card by looking at it, if it is configured as suggested you have 3 of the four modules. >>

The TDM21B card has, as per Digium's, two (2) FXS modules and 1 (one) FXO module. I did my best to thoroughly follow the Digium's  installation instructions given in my previous email, at no avail. I even sent them a request for support (before addressing it to this mailing list), their answer was simply this "Digium does not support FreeBSD, either freely or commercially."

If I knew this I wouldn't not acquire the board... or at least not the FXO module.

Thks

Lai
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-bsd/attachments/20050405/7e126cd8/attachment.htm