[Asterisk-bsd] Zaptel for 1 port TDM400P

[Chris Stenton]

I Think you will find that the latest zaptel FreeBSD port (0.5)  has some
TDM support however its interface is for the ports version of asterisk. If
you try and run the asterisk CVS-head then it will panic your machine as the
zaptel interface has changed.

I am not sure what is happening with the zaptel driver for the
asterisk-head. Maybe Rich or Olle can bring some light to the matter.

The X101P messages that you see from the driver are fine.

Chris

----- Original Message ----- 
From: "Chris Willis" <chris@mokum.org>
To: <asterisk-bsd@lists.digium.com>
Sent: Tuesday, June 29, 2004 10:38 PM
Subject: [Asterisk-bsd] Zaptel for 1 port TDM400P


> Perhaps someone can help me with this. I read at
> http://www.voip-info.org/wiki-FreeBSD+zaptel that the current Zaptel
> drivers for FreeBSD support the TDM400P in beta at least. I have a
> FreeBSD system installed (5.2.1) and the X101P card works well enough
> but I cannot get my system to even -see- the TDM card. And yes, the
> 12V power supply is connected.
>
> I also read in the archives a message from the middle of this month
> saying that the drivers for the TDM were being worked on so maybe I
> just have to wait but I'm wondering if anyone has been able to
> successfully get things up and running.
>
> To be honest, I'm quite new to all this but really have read all the
> manuals and references I can find on it.
>
> FYI the info below came at the end of the last boot. I don't think it
> has anything to do with the TDM card as only the X101P is mentioned
> but thought I'd include it to be on the safe side.
>
> Jun 29 23:10:20 vuur kernel: WARNING: driver "zaptel" used unreserved
major device number 196
> Jun 29 23:10:20 vuur kernel: Zapata Telephony Interface Registered on
major 196
> Jun 29 23:10:20 vuur kernel: ZapTel device: vendor=e159 device=1
subvendor=8085
> Jun 29 23:10:20 vuur kernel: wcfxo0: <Wildcard X101P> port 0xe800-0xe8ff
mem 0xfe123000-0xfe123fff irq 25 at device 6.0 on pci0
> Jun 29 23:10:20 vuur kernel: ZapTel Attach for wcfxo0: deviceID : 0xe159
> Jun 29 23:10:20 vuur kernel: Wildcard X101P Board 1
> Jun 29 23:10:21 vuur kernel: NMI ISA 30, EISA ff
> Jun 29 23:10:21 vuur kernel: wcfxo: DAA mode is 'FCC'
> Jun 29 23:10:21 vuur kernel: Found a Wildcard FXO: Wildcard X101P
> Jun 29 23:10:21 vuur kernel: ZapTel device loaded.
> Jun 29 23:10:48 vuur kernel: Recalculating slaves on WCFXO/0/0
> Jun 29 23:10:48 vuur kernel: Done Recalculating slaves on WCFXO/0/0 (last
is WCFXO/0/0)
> Jun 29 23:10:48 vuur kernel: Configured channel WCFXO/0/0, flags 0201, sig
2004
>
> Thanks for any help.
>
> Chris
>
> --
> Chris Willis                          mailto:chris@mokum.org
>
>
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>