[Asterisk-bsd] Zaptel for 1 port TDM400P

[Chris Willis]

Perhaps someone can help me with this. I read at
http://www.voip-info.org/wiki-FreeBSD+zaptel that the current Zaptel
drivers for FreeBSD support the TDM400P in beta at least. I have a
FreeBSD system installed (5.2.1) and the X101P card works well enough
but I cannot get my system to even -see- the TDM card. And yes, the
12V power supply is connected.

I also read in the archives a message from the middle of this month
saying that the drivers for the TDM were being worked on so maybe I
just have to wait but I'm wondering if anyone has been able to
successfully get things up and running.

To be honest, I'm quite new to all this but really have read all the
manuals and references I can find on it.

FYI the info below came at the end of the last boot. I don't think it
has anything to do with the TDM card as only the X101P is mentioned
but thought I'd include it to be on the safe side.

Jun 29 23:10:20 vuur kernel: WARNING: driver "zaptel" used unreserved major device number 196
Jun 29 23:10:20 vuur kernel: Zapata Telephony Interface Registered on major 196
Jun 29 23:10:20 vuur kernel: ZapTel device: vendor=e159 device=1 subvendor=8085
Jun 29 23:10:20 vuur kernel: wcfxo0: <Wildcard X101P> port 0xe800-0xe8ff mem 0xfe123000-0xfe123fff irq 25 at device 6.0 on pci0
Jun 29 23:10:20 vuur kernel: ZapTel Attach for wcfxo0: deviceID : 0xe159
Jun 29 23:10:20 vuur kernel: Wildcard X101P Board 1
Jun 29 23:10:21 vuur kernel: NMI ISA 30, EISA ff
Jun 29 23:10:21 vuur kernel: wcfxo: DAA mode is 'FCC'
Jun 29 23:10:21 vuur kernel: Found a Wildcard FXO: Wildcard X101P
Jun 29 23:10:21 vuur kernel: ZapTel device loaded.
Jun 29 23:10:48 vuur kernel: Recalculating slaves on WCFXO/0/0
Jun 29 23:10:48 vuur kernel: Done Recalculating slaves on WCFXO/0/0 (last is WCFXO/0/0)
Jun 29 23:10:48 vuur kernel: Configured channel WCFXO/0/0, flags 0201, sig 2004

Thanks for any help.

Chris

--
Chris Willis                          mailto:chris@mokum.org