[Asterisk-bsd] SIP Clients - No voice.

[Jefferson Carvalho]

Hi Josansson,

I'm using FreeBSD 5.2.1-RELEASE / Asterisk-1.0.RC2
Those clients aren't behind nat.
They're on the same net!


Regards,

-Jefferson


Olle E. Johansson escreveu:

> Jefferson Carvalho wrote:
>
>> Richard,
>>
>> I'm using at this first momment only X-Lite as Sip client.
>> I'm waiting for Sipura and Grandstream devices
>> arrive from USA.
>> I'll have to put a TDM04B ( 2FXO/2FXS  ) to
>> work .. too. (  My PABX is a siemens HiPath )
>> So ... i'll have so much work..!
>
> Start with connecting everything without having NAT between clients 
> and Asterisk.
> When you have that working, start reconfiguring for the NAT...
> Start simple. NAT traversal is not simple.
>
>>
>>  >>>>>>A bit of my sip.conf.
>>
>> [1260]
>> type=friend
>> username=1260
>> mailbox=2500
>> context =default
>> secret=jeff
>> callerid="Jefferson Carvalho" <1260>
>> host=dynamic
>> nat=yes                       ; X-Lite is behind a NAT router
>> canreinvite=no                ; Typically set to NO if behind NAT
>
>
>> ;disallow=all
>
> You need to enable this before you have any allow= lines! Remove the 
> semicolon.
>
>> allow=gsm                     ; GSM consumes far less bandwidth than 
>> ulaw
>> allow=ulaw
>> allow=alaw
>>
>
> What kind of BSD system are you using?
>
> /O
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>
> __________ NOD32 1.853 (20040830) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.nod32.com
>
>
>