[asterisk-biz] Asterisk card offer
Andy Spring
andyspr at gmail.com
Mon May 10 23:21:52 CDT 2010
Hello, the functions of our cards are extreamly same with digium, and they
are produced by ourselves with our own brand.
2010/5/11 Brad Bendy <brad.bendy at benganetworks.com>
> Are these Digium cards or your brand, ie: not Digium?
>
> On Tue, 2010-05-11 at 12:00 +0800, Andy Spring wrote:
> > Dear Everyone,
> >
> > Our company now can provide some models of asterisk card, both the
> > quality and price are very good, they come with new technology, based
> > on digium card.
> > Here below is our TE405P details to show to you everyone, we have also
> > some other models of
> > AX-4T Four T1 PCI Card ;
> > TDM410P Asterisk card;
> > TDM800P Asterisk card;
> > TE110P Asterisk card;
> > Asterisk card with 2 FXO + 2 FXS modules
> > If anyone is interested in, please kindly do not hesitate to let me
> > know, so I can send the details to you for your reference. Thanks.
> >
> > Details of TE405P:
> > The TE405P supports both E1, T1, J1 environments and is selectable on
> > a per-card or per-port basis. This feature enables signaling
> > translation between E1, T1, and J1 equipment and allows inexpensive T1
> > channel banks to connect with E1 circuits. Because the TE405P improves
> > I/O speed by up to 10 times, the result is reduced CPU usage and
> > increased card density per server.
> > Digium has designed the TE405P to be fully compatible with existing
> > software applications and it is fully integrated with the Asterisk
> > Open Source PBX/IVR platform. Also, the open source driver supports an
> > API interface for custom application development. With the combination
> > of Digium Hardware and Asterisk software, numerous combinations of
> > telephony configurations are possible. From the traditional PBX to
> > VoIP Gateways, Digium solutions are paving the way for a new
> > generation of worldwide communications.
> >
> > The TE405P supports industry standard telephony and data protocols,
> > including Primary Rate ISDN (both N. American and Standard Euro)
> > protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data
> > modes. Both line-side and trunk-side interfaces are supported, also
> > included are advanced call features.
> >
> > The TE405P is for use only with a 5.0 volt PCI slot. The TE410P is for
> > use only with a 3.3 volt PCI slot - typically available on newer
> > server motherboards and in 64-bit PCI bus architectures
> >
> >
> > Thanks
> >
> > Best regards
> > --
> > andy
> > andyspr at gmail.com
> >
> > --
> > _____________________________________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-biz mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-biz
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-biz
>
--
andy
andyspr at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-biz/attachments/20100511/7443dd27/attachment.htm
More information about the asterisk-biz
mailing list