[asterisk-biz] about E1 trunk - there's a 0 added

[Steve Davies]

On 1/2/08, sunxiujun26 at sohu.com <sunxiujun26 at sohu.com> wrote:
>
> hello everyone,
>
>         When i   use  E1  trunk, i have this  problem:
>
>         There is always  a "0" at the head of the number i dialed.  that is ,  if  i dial the number "98765432
>
> ", the other side (Operators) will receive  "098765432". The send out number is right("98765432
>
> "),   and  i also have another server(not asterisk pbx)   ,  it can make calls normally with the same E1 trunk.
>
>           today ,i have made a test.  i connect two asterisk_pbx's E1 with  Coaxial,and they worked well. the received number is the same as the one i dialed.
>
>         Does anyone know what  's wrong?  i am crazy with it.......
>
>         Thank you for advance!
>
[snip]

The following parameters are used on all my systems, and I believe
will help with your issue:

zapata.conf

[channels]
pridialplan=unknown
prilocaldialplan=unknown
internationalprefix=00
nationalprefix=0
.
.
.

Regards,
Steve