[asterisk-biz] Can asterisk play nicely with a CISCO IAD2431

[bob murphy]

Hey Gang,

we have deployed quite a few asterisk PBX's with SIP access providors that
use the Cisco IAD and it has been a great fit.  Expecially when the carrier
delivers everything over the ethernet port.  No telco interfaces are needed
Very slick!

Bob


On 1/25/07, Gregory Boehnlein <damin at nacs.net> wrote:
>
>  >  The Cisco IAD comes in 8FXS, 16FXS, 24FXS and T1/E1 variants.  Specs
> are here along with a good visual of the network topography for both TDM and
> VoIP.
> >
> http://www.cisco.com/en/US/products/hw/gatecont/ps887/products_data_sheet09186a008019aded.html<http://www.cisco.com/en/US/products/hw/gatecont/ps887/products_data_sheet09186a008019aded.html%C2%A0>
>
> >  Supports SIP and MGCP, I would think it would work fine, but I do not
> have any official documentation of interoperability.  A lot of IP Centrex /
> Hosted providers use
> > these at the customer prem.  Covad also uses it extensively for their
> Integrated Access service.
>
> We have deployed these with Asterisk w/out any problems. SIP works just
> like the rest of the Cisco IOS SIP products work, w/ the same quirks. Have
> noticed that the FXS ports can be very "fickle" and intolerant of miswiring,
> so make sure your Analog wiring plant is clean before you cross connect the
> IAD into it.
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com <http://easynews.com/>--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-biz
>
>
>


-- 
Bob Murphy
Principal


Arreva Communications
www.arrevausa.com

949-334-2022-SIP Connect
949-842-8450-Wireless
949-349-0209-Fax
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-biz/attachments/20070125/4e5b52b1/attachment.htm