[Asterisk-biz] Looking for a configuration software

[Ariel Batista]

Amp has changed allot
 But you can make your own changes and setup in a few files that don't get
change. Only the voicemail.conf, and the files_additional.conf files get
changed. There are extensions_custom.conf which you can edit and add your
settings too. Also you can edit the Sip.conf main area and unless you
upgrade the system this will not get changed.

 On 9/28/05, Kanuri, Seshu (Company IT) <Seshu.Kanuri at morganstanley.com>
wrote:
>
> May be the AMP forum is the right place to post this but, briefly here
> are my issues:
>
> 1)Once AMP is in place, we cannot make changes to the config files using
> any editor as they are overwritten. This is a major issue as some times
> it is esssential to by pass what AMP configures. What is the remedy for
> this? Do you have plans to sync-up config files to the DB also?
>
> 2)AMP does not support Polycom phones now. Even if you add the
> additional Polycom related paremeters in the GUI, it does not store
> them. For ex:
>
> progressinband=no ; Polycom Phones do not support Progressive
> inband.
> ; We should not use 'progressinband=never'
>
> This statement is not saved in version 1.7 or so as I remember. I don't
> know if this has been fixed now
>
> Seshu Kanuri
>
> -----Original Message-----
> From: asterisk-biz-bounces at lists.digium.com
> [mailto:asterisk-biz-bounces at lists.digium.com] On Behalf Of Jason Becker
> Sent: Wednesday, September 28, 2005 12:10 PM
> To: Commercial and Business-Oriented Asterisk Discussion
> Subject: Re: [Asterisk-biz] Looking for a configuration software
>
> Colin Anderson wrote:
> > Demo looks very good. I like how you de-aggregate all of the various
> > functions i.e. you can add *just* a voicemail or *just* a phone, with
> > AMP it's kind of all or nothing. The multi-tenant is great.
>
> Just wanted to point out that with the release of 1.10.009 you do have
> more control over this. You can create just a User (and optionally
> Voicemailbox) or just a Device. And the Device can be any Asterisk
> supported technology. As an example I can create a Zap Device
> (Zap/[channel]/XXXXXXX) and associate it with my User (Extension) so
> that when I am out of the office when someone dials my extension it will
> ring my cel. When I'm back in the office I can turn this off so that my
> desk phone rings when my extension is dialed. The Device/User separation
> in 009 lays the foundation for features like find-me/follow-me, etc.
>
> Regards,
>
> --
> Jason Becker
> Director & CEO
> Coalescent Systems Inc.
> Enabling Open Source Telephony
> 403.244.8089
> www.coalescentsystems.ca <http://www.coalescentsystems.ca>
> _______________________________________________
> Asterisk-Biz mailing list
> Asterisk-Biz at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-biz
> --------------------------------------------------------
>
> NOTICE: If received in error, please destroy and notify sender. Sender
> does not waive confidentiality or privilege, and use is prohibited.
> _______________________________________________
> Asterisk-Biz mailing list
> Asterisk-Biz at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-biz
>



--
Ariel Batista
Kasi International
Office: 305-574-6721 FX: 305-574-0212
Home: 305-574-1495 Cell: 786-376-1896
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-biz/attachments/20050928/680f0e89/attachment.htm