[Asterisk-biz] voipjet?
Matt
mhoppes at gmail.com
Mon May 16 03:11:43 MST 2005
Yeah except the SPA-xxxx is using in-band... and the x-lite had to use
outof-band... ugh :)
On 5/15/05, Paul <digium-list at 9ux.com> wrote:
> Since that works, you can use the web interface to see what dtmfmode the
> spa-xxxx is using and set your softphone to use the same.
>
> Matt wrote:
>
> >Interesting... it seems to work fine with SPA-XXXX units.. it just
> >seems to be the xten soft phone... wierd... wonder why one dtmf would
> >get through and then no others?
> >
> >On 5/15/05, Paul <digium-list at 9ux.com> wrote:
> >
> >
> >>Matt wrote:
> >>
> >>
> >>
> >>>Yes... when doing an echo test.. or calling out over any other of the
> >>>providers I use... or any of my PRI lines.... I can hear the DTMF
> >>>tones just fine... it's only voipjet that I'm having an issue with,
> >>>and only after the first DTMF tone is sent.. Clearly I don't think
> >>>I'm going to get anywhere here.
> >>>
> >>>On 5/15/05, Paul <digium-list at 9ux.com> wrote:
> >>>
> >>>
> >>>
> >>>
> >>>>Matt wrote:
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>>The current device I am using is an xten soft-phone. And to answer
> >>>>>the questions when I call myself.. I can hear ME (from both sides) but
> >>>>>only ever hear the first OUTGOING dtmf tone...
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>What about the * extension 600 echo test? Did you try that? You should
> >>>>be able to hear dtmf echoed back except for # which takes you out of the
> >>>>test.
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>The codec and dtmfmode have to be compatible. You can force them for one
> >>provider only in sip.conf and iax.conf to test this.
> >>
> >>
> >>
>
> _______________________________________________
> Asterisk-Biz mailing list
> Asterisk-Biz at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-biz
>
More information about the asterisk-biz
mailing list