[Asterisk-biz] voipjet?

[Paul]

Since that works, you can use the web interface to see what dtmfmode the 
spa-xxxx is using and set your softphone to use the same.

Matt wrote:

>Interesting... it seems to work fine with SPA-XXXX units.. it just
>seems to be the xten soft phone... wierd... wonder why one dtmf would
>get through and then no others?
>
>On 5/15/05, Paul <digium-list at 9ux.com> wrote:
>  
>
>>Matt wrote:
>>
>>    
>>
>>>Yes... when doing an echo test.. or calling out over any other of the
>>>providers I use... or any of my PRI lines.... I can hear the DTMF
>>>tones just fine... it's only voipjet that I'm having an issue with,
>>>and only after the first DTMF tone is sent..  Clearly I don't think
>>>I'm going to get anywhere here.
>>>
>>>On 5/15/05, Paul <digium-list at 9ux.com> wrote:
>>>
>>>
>>>      
>>>
>>>>Matt wrote:
>>>>
>>>>
>>>>
>>>>        
>>>>
>>>>>The current device I am using is an xten soft-phone.    And to answer
>>>>>the questions when I call myself.. I can hear ME (from both sides) but
>>>>>only ever hear the first OUTGOING dtmf tone...
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>          
>>>>>
>>>>What about the * extension 600 echo test? Did you try that? You should
>>>>be able to hear dtmf echoed back except for # which takes you out of the
>>>>test.
>>>>
>>>>
>>>>
>>>>        
>>>>
>>The codec and dtmfmode have to be compatible. You can force them for one
>>provider only in sip.conf and iax.conf to test this.
>>
>>    
>>