[zaptel-commits] kpfleming: branch 1.4 r4469 - in /branches/1.4: ./ build_tools/ firmware/ ker...
SVN commits to the Zaptel project
zaptel-commits at lists.digium.com
Thu Aug 7 13:58:55 CDT 2008
Author: kpfleming
Date: Thu Aug 7 13:58:55 2008
New Revision: 4469
URL: http://svn.digium.com/view/zaptel?view=rev&rev=4469
Log:
remove support for the Digium TC400 transcoder card; the interace to this card has been completely redesigned, and the new interface will only be present in DAHDI; TC400 users will need to upgrade to DAHDI 2.0.0 to continue using their transcoder cards
Removed:
branches/1.4/kernel/wctc4xxp/
branches/1.4/kernel/zttranscode.c
Modified:
branches/1.4/Makefile
branches/1.4/README
branches/1.4/build_tools/genudevrules
branches/1.4/firmware/Makefile
branches/1.4/firmware/firmware.xml
branches/1.4/kernel/xpp/utils/zaptel-helper
branches/1.4/kernel/zaptel-base.c
branches/1.4/kernel/zaptel.h
branches/1.4/live_zap
branches/1.4/zaptel.xml
Modified: branches/1.4/Makefile
URL: http://svn.digium.com/view/zaptel/branches/1.4/Makefile?view=diff&rev=4469&r1=4468&r2=4469
==============================================================================
--- branches/1.4/Makefile (original)
+++ branches/1.4/Makefile Thu Aug 7 13:58:55 2008
@@ -103,7 +103,7 @@
endif
ifeq ($(BUILDVER),linux24)
-MENUSELECT_MODULES+=xpp wctc4xxp wctdm24xxp zttranscode
+MENUSELECT_MODULES+=xpp wctdm24xxp
endif
ifeq ($(findstring xpp,$(MENUSELECT_MODULES)),)
@@ -117,8 +117,8 @@
endif
#SUBDIRS_UTILS += ppp
-TOPDIR_MODULES:=pciradio tor2 torisa wcfxo wct1xxp wctdm wcte11xp wcusb zaptel ztd-eth ztd-loc ztdummy ztdynamic zttranscode
-SUBDIR_MODULES:=wct4xxp wctc4xxp xpp wctdm24xxp wcte12xp
+TOPDIR_MODULES:=pciradio tor2 torisa wcfxo wct1xxp wctdm wcte11xp wcusb zaptel ztd-eth ztd-loc ztdummy ztdynamic
+SUBDIR_MODULES:=wct4xxp xpp wctdm24xxp wcte12xp
TOPDIR_MODULES+=$(MODULES_EXTRA)
SUBDIR_MODULES+=$(SUBDIRS_EXTRA)
BUILD_TOPDIR_MODULES:=$(filter-out $(MENUSELECT_MODULES),$(TOPDIR_MODULES))
@@ -452,7 +452,7 @@
# Pushing those two to a separate target that is not used by default:
install-modconf:
- build_tools/genmodconf $(BUILDVER) "$(ROOT_PREFIX)" "$(filter-out zaptel ztdummy xpp zttranscode ztdynamic,$(BUILD_MODULES)) $(MODULE_ALIASES)"
+ build_tools/genmodconf $(BUILDVER) "$(ROOT_PREFIX)" "$(filter-out zaptel ztdummy xpp ztdynamic,$(BUILD_MODULES)) $(MODULE_ALIASES)"
@if [ -d /etc/modutils ]; then \
/sbin/update-modules ; \
fi
@@ -498,13 +498,11 @@
rm -f $(DESTDIR)/dev/zap/channel
rm -f $(DESTDIR)/dev/zap/pseudo
rm -f $(DESTDIR)/dev/zap/timer
- rm -f $(DESTDIR)/dev/zap/transcode
rm -f $(DESTDIR)/dev/zap/253
rm -f $(DESTDIR)/dev/zap/252
rm -f $(DESTDIR)/dev/zap/251
rm -f $(DESTDIR)/dev/zap/250
mknod $(DESTDIR)/dev/zap/ctl c 196 0
- mknod $(DESTDIR)/dev/zap/transcode c 196 250
mknod $(DESTDIR)/dev/zap/timer c 196 253
mknod $(DESTDIR)/dev/zap/channel c 196 254
mknod $(DESTDIR)/dev/zap/pseudo c 196 255
Modified: branches/1.4/README
URL: http://svn.digium.com/view/zaptel/branches/1.4/README?view=diff&rev=4469&r1=4468&r2=4469
==============================================================================
--- branches/1.4/README (original)
+++ branches/1.4/README Thu Aug 7 13:58:55 2008
@@ -44,7 +44,6 @@
Other Drivers
~~~~~~~~~~~~~
- pciradio: Zapata Telephony PCI Quad Radio Interface
-- wctc4xxp: Digium hardware transcoder cards (also need zttranscode)
- ztd-eth: TDM over Ethernet (TDMoE) driver. Requires ztdynamic
- ztd-loc: Mirror a local span. Requires ztdynamic
- ztdummy: A dummy driver that only provides a zaptel timing source.
@@ -490,8 +489,6 @@
* /dev/zap/NNN (196:NNN) - for NNN in the range 1-249. A device file for
zaptel channel NNN. It can be used to read data from the channel
and write data to the channel.
-* /dev/zap/transcode (196:250) - Used to connect to a zaptel transcoding
- device.
* /dev/zap/timer (196:253) - Allows setting timers. Used anywhere?
* /dev/zap/channel (196:254) - Can be used to open an arbitrary zaptel
channel. This is an alternative to /dev/zap/NNN that is not limited to
Modified: branches/1.4/build_tools/genudevrules
URL: http://svn.digium.com/view/zaptel/branches/1.4/build_tools/genudevrules?view=diff&rev=4469&r1=4468&r2=4469
==============================================================================
--- branches/1.4/build_tools/genudevrules (original)
+++ branches/1.4/build_tools/genudevrules Thu Aug 7 13:58:55 2008
@@ -24,7 +24,6 @@
# udev rules to generate the /dev/zap device files (if not yet provided
# by your distribution):
KERNEL${match}"zapctl", NAME="zap/ctl"
-KERNEL${match}"zaptranscode", NAME="zap/transcode"
KERNEL${match}"zaptimer", NAME="zap/timer"
KERNEL${match}"zapchannel", NAME="zap/channel"
KERNEL${match}"zappseudo", NAME="zap/pseudo"
Modified: branches/1.4/firmware/Makefile
URL: http://svn.digium.com/view/zaptel/branches/1.4/firmware/Makefile?view=diff&rev=4469&r1=4468&r2=4469
==============================================================================
--- branches/1.4/firmware/Makefile (original)
+++ branches/1.4/firmware/Makefile Thu Aug 7 13:58:55 2008
@@ -19,27 +19,22 @@
OCT6114_064_VERSION:=1.05.01
OCT6114_128_VERSION:=1.05.01
-TC400M_VERSION:=MR6.12
VPMADT032_VERSION:=1.07
FIRMWARE_URL:=http://downloads.digium.com/pub/telephony/firmware/releases
# Firmware files should use the naming convention: zaptel-fw-<base name>-<sub name>-<version> or zaptel-fw-<base name>-<version>
-# First example: zaptel-fw-oct6114-064-1.05.01
+# Example: zaptel-fw-oct6114-064-1.05.01
# This means this is version 1.05.01 of the oct6114 64 firmware
-# Second example: zaptel-fw-tc400m-MR5.6
-# This means this is version MR5.6 of the tc400m firmware
# Build a list of firmware package filenames we need
FIRMWARE:=$(MENUSELECT_FIRMWARE:FIRMWARE-OCT6114-064=zaptel-fw-oct6114-064-$(OCT6114_064_VERSION).tar.gz)
FIRMWARE:=$(FIRMWARE:FIRMWARE-OCT6114-128=zaptel-fw-oct6114-128-$(OCT6114_128_VERSION).tar.gz)
-FIRMWARE:=$(FIRMWARE:FIRMWARE-TC400M=zaptel-fw-tc400m-$(TC400M_VERSION).tar.gz)
FIRMWARE:=$(FIRMWARE:FIRMWARE-VPMADT032=zaptel-fw-vpmadt032-$(VPMADT032_VERSION).tar.gz)
# Build a list of object files if hotplug will not be used
OBJECT_FILES:=$(MENUSELECT_FIRMWARE:FIRMWARE-OCT6114-064=zaptel-fw-oct6114-064.o)
OBJECT_FILES:=$(OBJECT_FILES:FIRMWARE-OCT6114-128=zaptel-fw-oct6114-128.o)
-OBJECT_FILES:=$(OBJECT_FILES:FIRMWARE-TC400M=zaptel-fw-tc400m.o)
OBJECT_FILES:=$(OBJECT_FILES:FIRMWARE-VPMADT032=zaptel-fw-vpmadt032.o)
# If "fetch" is used, --continue is not a valid option.
@@ -73,14 +68,6 @@
zaptel-fw-oct6114-128-%.tar.gz: have_download
ifeq ($(shell if ( [ "$(HOTPLUG_FIRMWARE)" = "no" ] ) || ( [ -d $(DESTDIR)/usr/lib/hotplug/firmware ] && ! [ -f $(DESTDIR)/usr/lib/hotplug/firmware/.zaptel-fw-oct6114-128-$(OCT6114_128_VERSION) ] ) || ( [ -d $(DESTDIR)/lib/firmware ] && ! [ -f $(DESTDIR)/lib/firmware/.zaptel-fw-oct6114-128-$(OCT6114_128_VERSION) ] ); then echo "yes"; else echo "no"; fi),yes)
- @echo "Attempting to download $@"
- @if test ! -f $@; then $(DOWNLOAD) $(WGET_ARGS) $(FIRMWARE_URL)/$@; fi;
- @if test ! -f $@; then exit 1; fi; \
- (cat $@ | gzip -d | tar -xf -)
-endif
-
-zaptel-fw-tc400m-%.tar.gz: have_download
-ifeq ($(shell if ( [ "$(HOTPLUG_FIRMWARE)" = "no" ] ) || ( [ -d $(DESTDIR)/usr/lib/hotplug/firmware ] && ! [ -f $(DESTDIR)/usr/lib/hotplug/firmware/.zaptel-fw-tc400m-$(TC400M_VERSION) ] ) || ( [ -d $(DESTDIR)/lib/firmware ] && ! [ -f $(DESTDIR)/lib/firmware/.zaptel-fw-tc400m-$(TC400M_VERSION) ] ); then echo "yes"; else echo "no"; fi),yes)
@echo "Attempting to download $@"
@if test ! -f $@; then $(DOWNLOAD) $(WGET_ARGS) $(FIRMWARE_URL)/$@; fi;
@if test ! -f $@; then exit 1; fi; \
@@ -140,21 +127,6 @@
else
@echo "Firmware zaptel-fw-oct6114-128.bin is already installed with required version $(OCT6114_128_VERSION)"
endif
-ifeq ($(shell if ( [ -d $(DESTDIR)/usr/lib/hotplug/firmware ] && ! [ -f $(DESTDIR)/usr/lib/hotplug/firmware/.zaptel-fw-tc400m-$(TC400M_VERSION) ] ) || ( [ -d $(DESTDIR)/lib/firmware ] && ! [ -f $(DESTDIR)/lib/firmware/.zaptel-fw-tc400m-$(TC400M_VERSION) ] ); then echo "yes"; else echo "no"; fi),yes)
- @echo "Installing zaptel-fw-tc400m.bin to hotplug firmware directories"
- if [ -d $(DESTDIR)/usr/lib/hotplug/firmware ]; then \
- $(INSTALL) -m 644 zaptel-fw-tc400m.bin $(DESTDIR)/usr/lib/hotplug/firmware && \
- (rm -rf $(DESTDIR)/usr/lib/hotplug/firmware/.zaptel-fw-tc400m-*; \
- touch $(DESTDIR)/usr/lib/hotplug/firmware/.zaptel-fw-tc400m-$(TC400M_VERSION)); \
- fi
- if [ -d $(DESTDIR)/lib/firmware ]; then \
- $(INSTALL) -m 644 zaptel-fw-tc400m.bin $(DESTDIR)/lib/firmware && \
- (rm -rf $(DESTDIR)/lib/firmware/.zaptel-fw-tc400m-*; \
- touch $(DESTDIR)/lib/firmware/.zaptel-fw-tc400m-$(TC400M_VERSION)); \
- fi
-else
- @echo "Firmware zaptel-fw-tc400m.bin is already installed with required version $(TC400M_VERSION)"
-endif
ifeq ($(shell if ( [ -d $(DESTDIR)/usr/lib/hotplug/firmware ] && ! [ -f $(DESTDIR)/usr/lib/hotplug/firmware/.zaptel-fw-vpmadt032-$(VPMADT032_VERSION) ] ) || ( [ -d $(DESTDIR)/lib/firmware ] && ! [ -f $(DESTDIR)/lib/firmware/.zaptel-fw-vpmadt032-$(VPMADT032_VERSION) ] ); then echo "yes"; else echo "no"; fi),yes)
@echo "Installing zaptel-fw-vpmadt032.bin to hotplug firmware directories"
if [ -d $(DESTDIR)/usr/lib/hotplug/firmware ]; then \
@@ -193,11 +165,6 @@
@echo Making firmware object file for zaptel-fw-oct6114-128.bin
../build_tools/make_firmware_object zaptel-fw-oct6114-128.bin $@
-# Build object file of a TC400M firmware image for linking
-zaptel-fw-tc400m.o: zaptel-fw-tc400m-$(TC400M_VERSION).tar.gz zaptel-fw-tc400m.bin
- @echo Making firmware object file for zaptel-fw-tc400m.bin
- ../build_tools/make_firmware_object zaptel-fw-tc400m.bin $@
-
# Build object file of a VPMADT032 firmware image for linking
zaptel-fw-vpmadt032.o: zaptel-fw-vpmadt032-$(VPMADT032_VERSION).tar.gz zaptel-fw-vpmadt032.bin
@echo Making firmware object file for zaptel-fw-vpmadt032.bin
Modified: branches/1.4/firmware/firmware.xml
URL: http://svn.digium.com/view/zaptel/branches/1.4/firmware/firmware.xml?view=diff&rev=4469&r1=4468&r2=4469
==============================================================================
--- branches/1.4/firmware/firmware.xml (original)
+++ branches/1.4/firmware/firmware.xml Thu Aug 7 13:58:55 2008
@@ -7,10 +7,6 @@
<defaultenabled>yes</defaultenabled>
<depend>wct4xxp</depend>
</member>
- <member name="FIRMWARE-TC400M" displayname="Digium TC400M" >
- <defaultenabled>yes</defaultenabled>
- <depend>wctc4xxp</depend>
- </member>
<member name="FIRMWARE-VPMADT032" displayname="Digium VPMADT032" >
<defaultenabled>yes</defaultenabled>
<depend>wctdm24xxp</depend>
Modified: branches/1.4/kernel/xpp/utils/zaptel-helper
URL: http://svn.digium.com/view/zaptel/branches/1.4/kernel/xpp/utils/zaptel-helper?view=diff&rev=4469&r1=4468&r2=4469
==============================================================================
--- branches/1.4/kernel/xpp/utils/zaptel-helper (original)
+++ branches/1.4/kernel/xpp/utils/zaptel-helper Thu Aug 7 13:58:55 2008
@@ -336,9 +336,6 @@
check=0
case "$i" in
xpp_usb) check=`grep 'STATUS=connected' 2>/dev/null /proc/xpp/xbuses | wc -l` ;;
- # FIXME: zttranscode will always load, and will never
- # add a span. Maybe try to read from /dev/zap/transcode .
- zttranscode) : ;;
*) if [ $lines_before -lt `count_proc_zap_lines` ]; then check=1; fi ;;
esac
if [ "$check" != 0 ]
Modified: branches/1.4/kernel/zaptel-base.c
URL: http://svn.digium.com/view/zaptel/branches/1.4/kernel/zaptel-base.c?view=diff&rev=4469&r1=4468&r2=4469
==============================================================================
--- branches/1.4/kernel/zaptel-base.c (original)
+++ branches/1.4/kernel/zaptel-base.c Thu Aug 7 13:58:55 2008
@@ -114,7 +114,6 @@
"-22.5db (CSU)"
} ;
-EXPORT_SYMBOL(zt_transcode_fops);
EXPORT_SYMBOL(zt_init_tone_state);
EXPORT_SYMBOL(zt_mf_tone);
EXPORT_SYMBOL(zt_register);
@@ -268,7 +267,6 @@
static struct zt_span *master;
static struct file_operations zt_fops;
-struct file_operations *zt_transcode_fops = NULL;
static struct
{
@@ -2580,33 +2578,11 @@
static int zt_open(struct inode *inode, struct file *file)
{
int unit = UNIT(file);
- int ret = -ENXIO;
struct zt_chan *chan;
+
/* Minor 0: Special "control" descriptor */
if (!unit)
return zt_ctl_open(inode, file);
- if (unit == 250) {
- if (!zt_transcode_fops)
- request_module("zttranscode");
- if (zt_transcode_fops && zt_transcode_fops->open) {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- if (zt_transcode_fops->owner) {
- __MOD_INC_USE_COUNT (zt_transcode_fops->owner);
-#else
- if (try_module_get(zt_transcode_fops->owner)) {
-#endif
- ret = zt_transcode_fops->open(inode, file);
- if (ret)
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- __MOD_DEC_USE_COUNT (zt_transcode_fops->owner);
-#else
- module_put(zt_transcode_fops->owner);
-#endif
- }
- return ret;
- }
- return -ENXIO;
- }
if (unit == 253) {
if (maxspans) {
return zt_timing_open(inode, file);
@@ -3123,16 +3099,6 @@
return zt_ctl_release(inode, file);
if (unit == 253) {
return zt_timer_release(inode, file);
- }
- if (unit == 250) {
- res = zt_transcode_fops->release(inode, file);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- if (zt_transcode_fops->owner)
- __MOD_DEC_USE_COUNT (zt_transcode_fops->owner);
-#else
- module_put(zt_transcode_fops->owner);
-#endif
- return res;
}
if (unit == 254) {
chan = file->private_data;
@@ -5148,9 +5114,6 @@
if (!unit)
return zt_ctl_ioctl(inode, file, cmd, data);
- if (unit == 250)
- return zt_transcode_fops->ioctl(inode, file, cmd, data);
-
if (unit == 253) {
timer = file->private_data;
if (timer)
@@ -7207,14 +7170,6 @@
return(ret); /* return what we found */
}
-static int zt_mmap(struct file *file, struct vm_area_struct *vm)
-{
- int unit = UNIT(file);
- if (unit == 250)
- return zt_transcode_fops->mmap(file, vm);
- return -ENOSYS;
-}
-
static unsigned int zt_poll(struct file *file, struct poll_table_struct *wait_table)
{
int unit = UNIT(file);
@@ -7222,9 +7177,6 @@
if (!unit)
return -EINVAL;
-
- if (unit == 250)
- return zt_transcode_fops->poll(file, wait_table);
if (unit == 253)
return zt_timer_poll(file, wait_table);
@@ -7631,7 +7583,7 @@
read: zt_read,
write: zt_write,
poll: zt_poll,
- mmap: zt_mmap,
+ mmap: NULL,
flush: NULL,
fsync: NULL,
fasync: NULL,
Modified: branches/1.4/kernel/zaptel.h
URL: http://svn.digium.com/view/zaptel/branches/1.4/kernel/zaptel.h?view=diff&rev=4469&r1=4468&r2=4469
==============================================================================
--- branches/1.4/kernel/zaptel.h (original)
+++ branches/1.4/kernel/zaptel.h Thu Aug 7 13:58:55 2008
@@ -768,11 +768,6 @@
#define ZT_SETPOLARITY _IOW (ZT_CODE, 92, int)
/*
- * Transcoder operations
- */
-#define ZT_TRANSCODE_OP _IOWR(ZT_CODE, 93, int)
-
-/*
* VoiceMail Waiting Indication (WMWI) -- implemented by low-level driver.
* Value: number of waiting messages (hence 0: switch messages off).
*/
@@ -892,57 +887,6 @@
#define ZT_TONEDETECT_ON (1 << 0) /* Detect tones */
#define ZT_TONEDETECT_MUTE (1 << 1) /* Mute audio in received channel */
-
-#define ZT_TRANSCODE_MAGIC 0x74a9c0de
-
-/* Operations */
-#define ZT_TCOP_ALLOCATE 1 /* Allocate/reset DTE channel */
-#define ZT_TCOP_TRANSCODE 2 /* Begin transcoding a block */
-#define ZT_TCOP_GETINFO 3 /* Get information (use zt_transcode_info) */
-#define ZT_TCOP_RELEASE 4 /* Release DTE channel */
-#define ZT_TCOP_TEST 5 /* test DTE device */
-typedef struct zt_transcode_info {
- unsigned int op;
- unsigned int tcnum;
- char name[80];
- int numchannels;
- unsigned int srcfmts;
- unsigned int dstfmts;
-} ZT_TRANSCODE_INFO;
-
-#define ZT_TCCONF_USETS (1 << 0) /* Use/update timestamp field */
-#define ZT_TCCONF_USESEQ (1 << 1) /* Use/update seqno field */
-
-#define ZT_TCSTAT_DSTRDY (1 << 0) /* Destination data is ready */
-#define ZT_TCSTAT_DSTBUSY (1 << 1) /* Destination data is outstanding */
-
-#define __ZT_TRANSCODE_BUFSIZ 16384
-#define ZT_TRANSCODE_HDRLEN 256
-#define ZT_TRANSCODE_BUFSIZ ((__ZT_TRANSCODE_BUFSIZ) - (ZT_TRANSCODE_HDRLEN))
-#define ZT_TRANSCODE_DSTOFFSET (((ZT_TRANSCODE_BUFSIZ) / 2) + ZT_TRANSCODE_HDRLEN)
-#define ZT_TRANSCODE_SRCOFFSET (((ZT_TRANSCODE_BUFSIZ) / 2) + ZT_TRANSCODE_HDRLEN)
-
-typedef struct zt_transcode_header {
- unsigned int srcfmt; /* See formats.h -- use TCOP_RESET when you change */
- unsigned int srcoffset; /* In bytes -- written by user */
- unsigned int srclen; /* In bytes -- written by user */
- unsigned int srctimestamp; /* In samples -- written by user (only used if ZT_TCCONF_USETS is set) */
- unsigned int srcseqno; /* In units -- written by user (only used if ZT_TCCONF_USESEQ is set) */
-
- unsigned int dstfmt; /* See formats.h -- use TCOP_RESET when you change */
- unsigned int dstoffset; /* In bytes -- written by user */
- unsigned int dsttimestamp; /* In samples -- read by user */
- unsigned int dstseqno; /* In units -- read by user (only used if ZT_TCCONF_USESEQ is set) */
- unsigned int dstlen; /* In bytes -- read by user */
- unsigned int dstsamples; /* In timestamp units -- read by user */
-
- unsigned int magic; /* Magic value -- ZT_TRANSCODE_MAGIC, read by user */
- unsigned int config; /* Read/write by user */
- unsigned int status; /* Read/write by user */
- unsigned char userhdr[ZT_TRANSCODE_HDRLEN - (sizeof(unsigned int) * 14)]; /* Storage for user parameters */
- unsigned char srcdata[ZT_TRANSCODE_BUFSIZ / 2]; /* Storage of source data */
- unsigned char dstdata[ZT_TRANSCODE_BUFSIZ / 2]; /* Storage of destination data */
-} ZT_TRANSCODE_HEADER;
struct zt_ring_cadence {
int ringcadence[ZT_MAX_CADENCE];
@@ -1700,35 +1644,6 @@
#endif
};
-struct zt_transcoder_channel {
- void *pvt;
- struct zt_transcoder *parent;
- wait_queue_head_t ready;
- int errorstatus;
- int offset;
- unsigned int chan_built;
- unsigned int built_fmts;
- unsigned int flags;
- unsigned int srcfmt;
- unsigned int dstfmt;
- struct zt_transcode_header *tch;
-};
-
-#define ZT_TC_FLAG_BUSY (1 << 0)
-#define ZT_TC_FLAG_TRANSIENT (1 << 1)
-
-
-struct zt_transcoder {
- struct zt_transcoder *next;
- char name[80];
- int numchannels;
- unsigned int srcfmts;
- unsigned int dstfmts;
- int (*operation)(struct zt_transcoder_channel *channel, int op);
- /* Transcoder channels */
- struct zt_transcoder_channel channels[0];
-};
-
#define ZT_WATCHDOG_NOINTS (1 << 0)
#define ZT_WATCHDOG_INIT 1000
@@ -1795,19 +1710,6 @@
/* Register a span. Returns 0 on success, -1 on failure. Pref-master is non-zero if
we should have preference in being the master device */
int zt_register(struct zt_span *span, int prefmaster);
-
-/* Allocate / free memory for a transcoder */
-struct zt_transcoder *zt_transcoder_alloc(int numchans);
-void zt_transcoder_free(struct zt_transcoder *ztc);
-
-/* Register a transcoder */
-int zt_transcoder_register(struct zt_transcoder *tc);
-
-/* Unregister a transcoder */
-int zt_transcoder_unregister(struct zt_transcoder *tc);
-
-/* Alert a transcoder */
-int zt_transcoder_alert(struct zt_transcoder_channel *ztc);
/* Unregister a span */
int zt_unregister(struct zt_span *span);
@@ -1847,8 +1749,6 @@
void zt_ec_chunk(struct zt_chan *chan, unsigned char *rxchunk, const unsigned char *txchunk);
void zt_ec_span(struct zt_span *span);
-
-extern struct file_operations *zt_transcode_fops;
/* Don't use these directly -- they're not guaranteed to
be there. */
Modified: branches/1.4/live_zap
URL: http://svn.digium.com/view/zaptel/branches/1.4/live_zap?view=diff&rev=4469&r1=4468&r2=4469
==============================================================================
--- branches/1.4/live_zap (original)
+++ branches/1.4/live_zap Thu Aug 7 13:58:55 2008
@@ -50,7 +50,7 @@
fi
MODULES_LOAD="$MODULES_LOAD xpp/xpp_usb"
;;
- wctdm24xxp | wct4xxp | wcte12xp | wctc4xp)
+ wctdm24xxp | wct4xxp | wcte12xp)
MODULES_LOAD="$MODULES_LOAD $mod/$mod"
;;
wanpipe)
Modified: branches/1.4/zaptel.xml
URL: http://svn.digium.com/view/zaptel/branches/1.4/zaptel.xml?view=diff&rev=4469&r1=4468&r2=4469
==============================================================================
--- branches/1.4/zaptel.xml (original)
+++ branches/1.4/zaptel.xml Thu Aug 7 13:58:55 2008
@@ -10,9 +10,6 @@
<member name="wct1xxp" displayname="Digium Wildcard T100P / E100P" remove_on_change="wct1xxp.o wct1xxp.ko">
</member>
<member name="wct4xxp" displayname="Digium Wildcard TE4XXP / TE2XXP" remove_on_change="wct4xxp/wct4xxp.o wct4xxp/wct4xxp.ko">
- </member>
- <member name="wctc4xxp" displayname="Digium Wildcard TC400B" remove_on_change="wctc4xxp/wctc4xxp.o wctc4xxp/wctc4xxp.ko">
- <depend>zttranscode</depend>
</member>
<member name="wctdm" displayname="Digium Wildcard TDM400P" remove_on_change="wctdm.o wctdm.ko">
</member>
@@ -35,8 +32,6 @@
<member name="ztdummy" displayname="Dummy Timing Interface" remove_on_change="ztdummy.o ztdummy.ko">
</member>
<member name="ztdynamic" displayname="Dynamic Span Support" remove_on_change="ztdynamic.o ztdynamic.ko">
- </member>
- <member name="zttranscode" displayname="Transcoder Support" remove_on_change="zttranscode.o zttranscode.ko">
</member>
</category>
More information about the zaptel-commits
mailing list