[zaptel-commits] tzafrir: trunk r2572 - /trunk/zaptel.init

[zaptel-commits at lists.digium.com]

Author: tzafrir
Date: Tue Jun  5 15:35:14 2007
New Revision: 2572

URL: http://svn.digium.com/view/zaptel?view=rev&rev=2572
Log:
* >& does not work with all /bin/sh shells (specifically not /bin/dash , 
  occasionally used as /bin/sh in Debian / Ubuntu).
* Removed some unnecessary 2>/dev/null . If ztcfg failed, the user
  should know, and have the data to fix the problem.
* Removing ztcfg -s from the stop target. Who needs it?

Modified:
    trunk/zaptel.init

Modified: trunk/zaptel.init
URL: http://svn.digium.com/view/zaptel/trunk/zaptel.init?view=diff&rev=2572&r1=2571&r2=2572
==============================================================================
--- trunk/zaptel.init (original)
+++ trunk/zaptel.init Tue Jun  5 15:35:14 2007
@@ -123,7 +123,7 @@
 	# the built-in echo of bash fails to print a proper error on failure
 	if ! /bin/echo "$sync_value" >/proc/xpp/sync
 	then 
-		echo >&2 "Updating XPP sync source failed (tried \"$sync_value\", XPP_SYNC='$XPP_SYNC')"
+		echo >2 "Updating XPP sync source failed (tried \"$sync_value\", XPP_SYNC='$XPP_SYNC')"
 	fi
 }
 
@@ -141,7 +141,7 @@
 run_ztcfg() {
 	if [ $system = debian ]; then
 	 	echo -n "Running ztcfg: " 
-	 	$ZTCFG_CMD >/dev/null 2>&1 && echo -n "done"
+	 	$ZTCFG_CMD && echo -n "done"
 		RETVAL=$?
 		echo "."
 	elif [ $system = redhat ]; then
@@ -156,12 +156,12 @@
 case "$1" in
   start)
 	# Load drivers
-	rmmod wcusb >& /dev/null
-	rmmod wcfxsusb >& /dev/null
-	rmmod audio >& /dev/null
+	rmmod wcusb 2> /dev/null
+	rmmod wcfxsusb 2> /dev/null
+	rmmod audio 2> /dev/null
 	if [ $system = debian ]; then
 	    echo -n "Loading zaptel framework: " 
-	    modprobe zaptel ${ARGS} >& /dev/null && echo -n "done"
+	    modprobe zaptel ${ARGS} 2> /dev/null && echo -n "done"
 	    echo "."
 	elif [ $system = redhat ]; then
 	    action "Loading zaptel framework: " modprobe zaptel ${ARGS}
@@ -180,7 +180,7 @@
 	echo -n "Loading zaptel hardware modules:"
 	for x in $MODULES; do 
 		eval localARGS="\$${x}_ARGS"
-		if modprobe ${x} ${ARGS} ${localARGS} >& /dev/null; then
+		if modprobe ${x} ${ARGS} ${localARGS} 2> /dev/null; then
 			echo -n " $x"
 		fi
 	done
@@ -190,9 +190,9 @@
 	zap_reg_xpp
 	fix_asterisbank_sync # can actually be run after ztcfg
 	
-	if [ ! -e /proc/zaptel/1 ]; then
-		echo "No functioning zap hardware found in /proc/zaptel, loading ztdummy"
-		modprobe ztdummy >& /dev/null
+	if head -c 0 /dev/zap/pseudo; then 
+		echo "No Zaptel timing source sound. loading ztdummy"
+		modprobe ztdummy 
 	fi
 
 	run_ztcfg
@@ -225,7 +225,7 @@
 				# zaphpec_enable properly installed
 				if [ $system = debian ]; then
 					echo -n "Running zaphpec_enable: "
-					/usr/sbin/zaphpec_enable >& /dev/null
+					/usr/sbin/zaphpec_enable 2> /dev/null
 				elif [ $system = redhat ]; then
 					action "Running zaphpec_enable: " /usr/sbin/zaphpec_enable
 				fi
@@ -243,7 +243,6 @@
 	;;
   stop)
 	# Unload drivers
-	$ZTCFG -s
 	echo -n "Unloading zaptel hardware drivers:"
   	unload_module zaptel
 	RETVAL=$?