[zaptel-commits] tzafrir: branch 1.4 r2690 - /branches/1.4/zaptel.init

[SVN commits to the Zaptel project]

Author: tzafrir
Date: Wed Jul  4 14:06:06 2007
New Revision: 2690

URL: http://svn.digium.com/view/zaptel?view=rev&rev=2690
Log:
Bourne shell scripts should not use >& . dash doesn't support it.
And all of them simply supressed errors, so they were replaced with
2> /dev/null .

(from branches/1.2 r2689)

Modified:
    branches/1.4/zaptel.init

Modified: branches/1.4/zaptel.init
URL: http://svn.digium.com/view/zaptel/branches/1.4/zaptel.init?view=diff&rev=2690&r1=2689&r2=2690
==============================================================================
--- branches/1.4/zaptel.init (original)
+++ branches/1.4/zaptel.init Wed Jul  4 14:06:06 2007
@@ -179,7 +179,7 @@
 	# zaphpec_enable properly installed
 	if [ $system = debian ]; then
 		echo -n "Running zaphpec_enable: "
-		/usr/sbin/zaphpec_enable >& /dev/null
+		/usr/sbin/zaphpec_enable 2> /dev/null
 	elif [ $system = redhat ]; then
 		action "Running zaphpec_enable: " /usr/sbin/zaphpec_enable
 	fi
@@ -217,12 +217,12 @@
 case "$1" in
   start)
 	# Load drivers
-	rmmod wcusb >& /dev/null
-	rmmod wcfxsusb >& /dev/null
-	rmmod audio >& /dev/null
+	rmmod wcusb 2> /dev/null
+	rmmod wcfxsusb 2> /dev/null
+	rmmod audio 2> /dev/null
 	if [ $system = debian ]; then
 	    echo -n "Loading zaptel framework: " 
-	    modprobe zaptel ${ARGS} >& /dev/null && echo -n "done"
+	    modprobe zaptel ${ARGS} 2> /dev/null && echo -n "done"
 	    echo "."
 	elif [ $system = redhat ]; then
 	    action "Loading zaptel framework: " modprobe zaptel ${ARGS}
@@ -241,7 +241,7 @@
 	echo -n "Loading zaptel hardware modules:"
 	for x in $MODULES; do 
 		eval localARGS="\$${x}_ARGS"
-		if modprobe ${x} ${ARGS} ${localARGS} >& /dev/null; then
+		if modprobe ${x} ${ARGS} ${localARGS} 2> /dev/null; then
 			echo -n " $x"
 			echo "."
 		fi
@@ -256,11 +256,11 @@
 	
 	if [ ! -e /proc/zaptel/1 ]; then
 		echo "No functioning zap hardware found in /proc/zaptel, loading ztdummy"
-		modprobe ztdummy >& /dev/null
+		modprobe ztdummy 2> /dev/null
 	fi
 	if [ $system = debian ]; then
 	    echo -n "Running ztcfg: " 
-	    $ZTCFG >& /dev/null && echo -n "done"
+	    $ZTCFG 2> /dev/null && echo -n "done"
 	    echo "."
 	elif [ $system = redhat ]; then
 	    action "Running ztcfg: " $ZTCFG
@@ -300,7 +300,7 @@
   reload)
 	if [ $system = debian ]; then
 	    echo -n "Reloading ztcfg: "
-	    $ZTCFG >& /dev/null && echo -n "done"
+	    $ZTCFG 2> /dev/null && echo -n "done"
 	    echo "."
 	elif [ $system = redhat ]; then
 	    action "Reloading ztcfg: " $ZTCFG