[zaptel-commits] tzafrir: branch 1.2 r1718 - in /branches/1.2/xpp:
./ utils/
zaptel-commits at lists.digium.com
zaptel-commits at lists.digium.com
Fri Dec 15 06:49:24 MST 2006
Author: tzafrir
Date: Fri Dec 15 07:49:24 2006
New Revision: 1718
URL: http://svn.digium.com/view/zaptel?view=rev&rev=1718
Log:
Sync to xpp RELEASE-1.2.0 2933.
r2847 at boole: diego | 2006-12-03 10:33:00 +0200
added documentation which explains which packages are needed to build
the drivers on different distributions.
r2862 at boole: tzafrir | 2006-12-05 08:43:50 +0200
README.Astribank: A typo in the sample config (changeset:2861).
r2891 at boole: tzafrir | 2006-12-08 01:11:45 +0200
Re-accept changeset:2832 after all.
r2892 at boole: tzafrir | 2006-12-08 02:46:07 +0200
Merge genzaptelconf changeset:2866 from trunk:
* Zapata comment on unidentified channel goes to $zapata_file
* Correct pattern for Sangoma A200 card's channels.
r2893 at boole: tzafrir | 2006-12-08 03:11:37 +0200
genzaptelconf:
* Add options xpp_fxo_rxgain: add a custom rxgain for every XPP FXO channel.
* Do print the original line for every channel.
r2909 at boole: tzafrir | 2006-12-10 20:03:59 +0200
Add some sleeps in older kernels in the firmware loading script.
r2932 at boole: tzafrir | 2006-12-14 17:30:12 +0200
Make the warning about a call to off-hook FXO debug. At least if we
cannot suppress it at module load time.
r2933 at boole: tzafrir | 2006-12-14 17:32:00 +0200
Don't redefine 'bool' on newer kerenls to fix building with kernel
2.6.19. Taken from Digium tree.
(from changeset:2930)
Modified:
branches/1.2/xpp/ (props changed)
branches/1.2/xpp/README.Astribank
branches/1.2/xpp/card_fxo.c
branches/1.2/xpp/utils/genzaptelconf
branches/1.2/xpp/utils/xpp_fxloader
branches/1.2/xpp/xdefs.h
branches/1.2/xpp/xpp_zap.c
Propchange: branches/1.2/xpp/
------------------------------------------------------------------------------
--- svk:merge (original)
+++ svk:merge Fri Dec 15 07:49:24 2006
@@ -1,7 +1,5 @@
-283159da-0705-0410-b60c-f2062b4bb6ad:/components/xpp-zaptel/branches/RELEASE-1.2.0/xpp:2832
+283159da-0705-0410-b60c-f2062b4bb6ad:/components/xpp-zaptel/branches/RELEASE-1.2.0/xpp:2933
283159da-0705-0410-b60c-f2062b4bb6ad:/components/xpp-zaptel/trunk/xpp:2830
-
f558416c-6c06-0410-9f27-dde2687782d0:/branches/1.4/xpp:1623
f558416c-6c06-0410-9f27-dde2687782d0:/team/tzafrir/xpp_1.2/xpp:1554
-
f558416c-6c06-0410-9f27-dde2687782d0:/trunk/xpp:1453
Modified: branches/1.2/xpp/README.Astribank
URL: http://svn.digium.com/view/zaptel/branches/1.2/xpp/README.Astribank?view=diff&rev=1718&r1=1717&r2=1718
==============================================================================
--- branches/1.2/xpp/README.Astribank (original)
+++ branches/1.2/xpp/README.Astribank Fri Dec 15 07:49:24 2006
@@ -21,6 +21,10 @@
firmware and initialization files for the Astribank:
make -C xpp/utils
+
+In order to build the user space utilities, you will need the libusb-dev
+package on Debian (and derivatives like ubuntu) or libusb-devel on RedHat
+(and derivatives like Centox/Trixbox).
INSTALLATION:
""""""""""""
@@ -222,7 +226,7 @@
Astribank 16: 8FXS/8FXO
fxoks=1-14
- fksks=15-22
+ fxsks=15-22
/etc/asterisk/zapata.conf
Modified: branches/1.2/xpp/card_fxo.c
URL: http://svn.digium.com/view/zaptel/branches/1.2/xpp/card_fxo.c?view=diff&rev=1718&r1=1717&r2=1718
==============================================================================
--- branches/1.2/xpp/card_fxo.c (original)
+++ branches/1.2/xpp/card_fxo.c Fri Dec 15 07:49:24 2006
@@ -209,7 +209,7 @@
priv = xpd->priv;
BUG_ON(!priv);
if(!IS_SET(priv->battery, pos)) {
- NOTICE("%s/%s/%d: WARNING: called while battery is off\n", xbus->busname, xpd->xpdname, pos);
+ DBG("%s/%s/%d: WARNING: called while battery is off\n", xbus->busname, xpd->xpdname, pos);
}
spin_lock_irqsave(&xpd->lock, flags);
mark_ring(xpd, pos, 0, 0); // No more rings
Modified: branches/1.2/xpp/utils/genzaptelconf
URL: http://svn.digium.com/view/zaptel/branches/1.2/xpp/utils/genzaptelconf?view=diff&rev=1718&r1=1717&r2=1718
==============================================================================
--- branches/1.2/xpp/utils/genzaptelconf (original)
+++ branches/1.2/xpp/utils/genzaptelconf Fri Dec 15 07:49:24 2006
@@ -295,6 +295,9 @@
# sadly, both input ports and output ports go into the same span as
# the FXS ports. Thus we need to separate between them. See also
# the zapata.conf section:
+
+ echo ";;; line=\"$line\"" >> $zapata_file
+
if [ "$astbank_type" != '' ];
then echo "# astbanktype: $astbank_type" >>$zaptel_file;
fi
@@ -369,7 +372,14 @@
esac
reset_values="$reset_values cidsignalling cidstart"
fi
- echo ";;; line=\"$line\"" >> $zapata_file
+ case "$line" in
+ *XPP_FXO*)
+ if [ "$xpp_fxo_rxgain" != '' ]; then
+ echo "rxgain=$xpp_fxo_rxgain" >> $zapata_file
+ reset_values="$reset_values rxgain"
+ fi
+ ;;
+ esac
# if kewlstart is not used, busydetect has to be employed:
if [ "$method" = 'ls' ]
then
@@ -576,13 +586,11 @@
for arg in "$@"; do
case "$arg" in
busydetect) echo "busydetect=no" >>$conf_file;;
- callerid) echo "callerid=" >>$conf_file;;
- cidstart) echo "cidstart=" >>$conf_file;;
- cidsignalling) echo "cidsignalling=" >>$conf_file;;
context) echo "context=default" >>$conf_file;;
- group) echo "group=" >>$conf_file;;
immediate) echo "immediate=no" >>$conf_file;;
- mailbox) echo "mailbox=" >>$conf_file;;
+ rxgain) echo "rxgain=0" >>$conf_file;;
+ txgain) echo "txgain=0" >>$conf_file;;
+ *) echo "$arg=" >>$conf_file;;
esac
done
}
@@ -692,7 +700,7 @@
# in case this is a real channel.
chan_num=`echo $line |awk '{print $1}'`
case "$line" in
- *WCTDM/*|*/WRTDM/*|*OPVXA1200/*)
+ *WCTDM/*|*\ WRTDM/*|*OPVXA1200/*)
# TDM400P/2400P and similar cards (Sangoma A200, OpenVox A1200)
# this can be either FXS or FXO
maybe_fxs=0
@@ -812,7 +820,7 @@
list) echo "# ??: $line";;
files)
echo "# ??: $line" >>$zaptel_file
- echo "; ??: $line" >>$zaptel_file
+ echo "; ??: $line" >>$zapata_file
esac
;;
esac
Modified: branches/1.2/xpp/utils/xpp_fxloader
URL: http://svn.digium.com/view/zaptel/branches/1.2/xpp/utils/xpp_fxloader?view=diff&rev=1718&r1=1717&r2=1718
==============================================================================
--- branches/1.2/xpp/utils/xpp_fxloader (original)
+++ branches/1.2/xpp/utils/xpp_fxloader Fri Dec 15 07:49:24 2006
@@ -75,6 +75,17 @@
FPGA_LOAD="/usr/sbin/fpga_load"
+# With Kernels older that 2.6.10 it seems to be possible
+# to trigger a race condition by running fxload or fpga_load
+# immediately after the detection of the device.
+KERNEL_HAS_USB_RACE=0
+case "`uname -r`" in 2.6.[89]*) KERNEL_HAS_USB_RACE=1;; esac
+sleep_if_race() {
+ if [ "$KERNEL_HAS_USB_RACE" = '1' ]; then
+ sleep 2
+ fi
+}
+
find_dev() {
v_id=$1
p_id=$2
@@ -83,6 +94,7 @@
}
do_fxload() {
+ sleep_if_race
( fxload -t fx2 $* 2>&1 1>/dev/null || exit 1 ) | $LOGGER
}
@@ -120,6 +132,7 @@
firm_ver=`hexfile_version $FIRMWARE_DIR/$fw`
$LOGGER "FPGA Firmware $FIRMWARE_DIR/$fw into $dev"
+ sleep_if_race
$FPGA_LOAD -D "$dev" -I "$FIRMWARE_DIR/$fw" 2>&1 >/dev/null | $LOGGER
status=$PIPESTATUS
if [ $status != 0 ]; then
@@ -193,6 +206,7 @@
else
FIRM_FPGA="$FIRMWARE_DIR/FPGA_$prod_id.hex"
fi
+ sleep_if_race
$FPGA_LOAD -D "$DEVICE" -I "$FIRM_FPGA" 2>&1 >/dev/null | $LOGGER
;;
esac
Modified: branches/1.2/xpp/xdefs.h
URL: http://svn.digium.com/view/zaptel/branches/1.2/xpp/xdefs.h?view=diff&rev=1718&r1=1717&r2=1718
==============================================================================
(empty)
Modified: branches/1.2/xpp/xpp_zap.c
URL: http://svn.digium.com/view/zaptel/branches/1.2/xpp/xpp_zap.c?view=diff&rev=1718&r1=1717&r2=1718
==============================================================================
--- branches/1.2/xpp/xpp_zap.c (original)
+++ branches/1.2/xpp/xpp_zap.c Fri Dec 15 07:49:24 2006
@@ -67,7 +67,7 @@
DEF_PARM(bool, zap_autoreg, 1, "Register spans automatically (1) or not (0)");
DEF_PARM(bool, prefmaster, 1, "Do we want to be zaptel preferred sync master");
#ifdef XPP_EC_CHUNK
-DEF_PARM_RO(bool, xpp_ec, 1, "Do we use our own (1) or Zaptel's (0) echo canceller");
+DEF_PARM_RO(bool, xpp_ec, 0, "Do we use our own (1) or Zaptel's (0) echo canceller");
#else
static int xpp_ec = 0;
#endif
More information about the zaptel-commits
mailing list