[test-results] [Bamboo] No agents to build plan LibPRI - 1.4 - Mac OS 10.4 - PPC - Default Job

[Bamboo]

-------------------------------------------------------------------------------
PRI-MACOS104XPPCV14-JOB1-35 has been queued, but there's no agent capable of building it.
-------------------------------------------------------------------------------

http://bamboo.asterisk.org/browse/PRI-MACOS104XPPCV14-JOB1/log

--------------
Code Changes
--------------
rmudgett (2207):

>B channel lost by incoming call in BRI NT PTMP mode.
>
>A phone's RELEASE_COMPLETE as a response to an initial broadcast SETUP
>blocks one B channel permantly when the call is cancelled.
>
>Scenario: A call to the ISDN Bus is acknowledged (ALERTING) by one
>phone/endpoint and rejected by another phone/endpoint with a
>RELEASE_COMPLETE.  The call is then cancelled by the caller.  If the whole
>procedure is repeated once again then any further call attempt is rejected
>(WARNING[5666]: app_dial.c:1546 dial_exec_full: Unable to create channel
>of type 'DAHDI' (cause 34 - Circuit/channel congestion)).  It seems that
>receiving a RELEASE_COMPLETE in that state blocks one B channel
>permanently when the call is cancelled by the caller.
>
>Background: The ISDN phones (Siemens Gigaset 3035 or CX253) we use for
>testing additionally contain a DECT base station, which operates as a
>different endpoint on the ISDN Bus (TEI).  If the DECT base station is not
>in use then there are no DECT phones registered to the base station.  The
>DECT base station responds to an incoming call not directed toward it with
>(RELEASE_COMPLETE, cause: no user responding).
>
>* Made initiate_hangup_if_needed() also hangup the subcall if it is in the
>NULL state.
>
>* Simplified q931_set_subcall_winner().
>
>JIRA ABE-2745
>JIRA SWP-2954
>


--
This message is automatically generated by Atlassian Bamboo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/test-results/attachments/20110217/20d9b39a/attachment-0001.htm>