[libpri-commits] rmudgett: branch 1.4 r2111 - in /branches/1.4: pri_internal.h q921.c
SVN commits to the libpri project
libpri-commits at lists.digium.com
Wed Nov 10 18:30:37 CST 2010
Author: rmudgett
Date: Wed Nov 10 18:30:33 2010
New Revision: 2111
URL: http://svnview.digium.com/svn/libpri?view=rev&rev=2111
Log:
SABME flood on backup D-channel in NFAS configuration.
Made delay restarting the PTP layer 2 link by the T200 time instead of
immediately. Q.921 does not specify any particular time to restart the
layer 2 link. Q.921 leaves it up to the upper layers to decide when or if
another attempt to bring layer 2 up is made. Earlier versions of libpri
used the T200 time to restart the link.
This is a reimplementaion of -r1878.
(closes issue #18255)
Reported by: bklang
JIRA SWP-2508
Modified:
branches/1.4/pri_internal.h
branches/1.4/q921.c
Modified: branches/1.4/pri_internal.h
URL: http://svnview.digium.com/svn/libpri/branches/1.4/pri_internal.h?view=diff&rev=2111&r1=2110&r2=2111
==============================================================================
--- branches/1.4/pri_internal.h (original)
+++ branches/1.4/pri_internal.h Wed Nov 10 18:30:33 2010
@@ -119,6 +119,8 @@
int t201_timer;
/*! Number of times T201 has expired. */
int t201_expirycnt;
+ /*! PTP layer 2 restart delay timer */
+ int restart_timer;
int cref; /* Next call reference value */
Modified: branches/1.4/q921.c
URL: http://svnview.digium.com/svn/libpri/branches/1.4/q921.c?view=diff&rev=2111&r1=2110&r2=2111
==============================================================================
--- branches/1.4/q921.c (original)
+++ branches/1.4/q921.c Wed Nov 10 18:30:33 2010
@@ -58,7 +58,6 @@
static void q921_mdl_error(struct q921_link *link, char error);
static void q921_mdl_remove(struct q921_link *link);
static void q921_mdl_destroy(struct q921_link *link);
-static void q921_restart_ptp_link_if_needed(struct q921_link *link);
/*!
* \internal
@@ -549,6 +548,72 @@
}
}
+static void restart_timer_expire(void *vctrl)
+{
+ struct pri *ctrl = vctrl;
+ struct q921_link *link;
+
+ if (ctrl->debug & PRI_DEBUG_Q921_STATE) {
+ pri_message(ctrl, "Kick starting layer 2\n");
+ }
+
+ ctrl->restart_timer = 0;
+ link = &ctrl->link;
+
+ switch (link->state) {
+ case Q921_TEI_ASSIGNED:
+ /* Try to bring layer 2 up. */
+ q921_discard_iqueue(link);
+ q921_establish_data_link(link);
+ link->l3_initiated = 1;
+ q921_setstate(link, Q921_AWAITING_ESTABLISHMENT);
+ break;
+ default:
+ /* Looks like someone forgot to stop the restart timer. */
+ pri_error(ctrl, "Layer 2 restart delay timer expired in state %d(%s)\n",
+ link->state, q921_state2str(link->state));
+ break;
+ }
+}
+
+static void restart_timer_stop(struct pri *ctrl)
+{
+ pri_schedule_del(ctrl, ctrl->restart_timer);
+ ctrl->restart_timer = 0;
+}
+
+static void restart_timer_start(struct pri *ctrl)
+{
+ if (ctrl->debug & PRI_DEBUG_Q921_DUMP) {
+ pri_message(ctrl, "-- Starting layer 2 restart delay timer\n");
+ }
+ pri_schedule_del(ctrl, ctrl->restart_timer);
+ ctrl->restart_timer =
+ pri_schedule_event(ctrl, ctrl->timers[PRI_TIMER_T200], restart_timer_expire, ctrl);
+}
+
+static pri_event *q921_ptp_delay_restart(struct pri *ctrl)
+{
+ pri_event *ev;
+
+ if (PTP_MODE(ctrl)) {
+ /*
+ * This is where we act a bit like L3 instead of L2, since we've
+ * got an L3 that depends on us keeping L2 automatically alive
+ * and happy for PTP links.
+ */
+ restart_timer_start(ctrl);
+
+ /* Notify the upper layer that layer 2 is down. */
+ ctrl->schedev = 1;
+ ctrl->ev.gen.e = PRI_EVENT_DCHAN_DOWN;
+ ev = &ctrl->ev;
+ } else {
+ ev = NULL;
+ }
+ return ev;
+}
+
/* This is the equivalent of the I-Frame queued up path in Figure B.7 in MULTI_FRAME_ESTABLISHED */
static int q921_send_queued_iframes(struct q921_link *link)
{
@@ -765,6 +830,7 @@
q921_setstate(link, Q921_TEI_ASSIGNED);
/* DL-RELEASE indication */
q931_dl_event(link, Q931_DL_EVENT_DL_RELEASE_IND);
+ q921_ptp_delay_restart(ctrl);
}
break;
case Q921_AWAITING_RELEASE:
@@ -777,6 +843,7 @@
/* DL-RELEASE confirm */
q931_dl_event(link, Q931_DL_EVENT_DL_RELEASE_CONFIRM);
q921_setstate(link, Q921_TEI_ASSIGNED);
+ q921_ptp_delay_restart(ctrl);
}
break;
default:
@@ -876,6 +943,7 @@
switch (link->state) {
case Q921_TEI_ASSIGNED:
/* If we aren't in a state compatiable with DL-DATA requests, start getting us there here */
+ restart_timer_stop(ctrl);
q921_establish_data_link(link);
link->l3_initiated = 1;
q921_setstate(link, Q921_AWAITING_ESTABLISHMENT);
@@ -1598,6 +1666,7 @@
}
break;
case Q921_TEI_ASSIGNED:
+ restart_timer_stop(ctrl);
q921_send_ua(link, h->u.p_f);
q921_clear_exception_conditions(link);
link->v_s = link->v_a = link->v_r = 0;
@@ -1658,7 +1727,7 @@
if (link->state == Q921_MULTI_FRAME_ESTABLISHED)
stop_t203(link);
q921_setstate(link, Q921_TEI_ASSIGNED);
- q921_restart_ptp_link_if_needed(link);
+ res = q921_ptp_delay_restart(ctrl);
break;
default:
pri_error(ctrl, "Don't know what to do with DISC in state %d(%s)\n",
@@ -1691,6 +1760,7 @@
switch (link->state) {
case Q921_TEI_ASSIGNED:
+ restart_timer_stop(ctrl);
/* XXX: deviation! Since we don't have a UI queue, we just discard our I-queue */
q921_discard_iqueue(link);
q921_setstate(link, Q921_TEI_UNASSIGNED);
@@ -1835,29 +1905,14 @@
ctrl = link->ctrl;
- /* This is where we act a bit like L3 instead of L2, since we've got an L3 that depends on us
- * keeping L2 automatically alive and happy for point to point links */
switch (error) {
- case 'Z':
- /* This is a special MDL error that actually isn't a spec error, but just so we
- * have an asynchronous context from the state machine to kick a PTP link back
- * up after being requested to drop politely (using DISC or DM) */
- case 'G':
- /* We pick it back up and put it back together for this case */
- q921_discard_iqueue(link);
- q921_establish_data_link(link);
- q921_setstate(link, Q921_AWAITING_ESTABLISHMENT);
- link->l3_initiated = 1;
-
- ctrl->schedev = 1;
- ctrl->ev.gen.e = PRI_EVENT_DCHAN_DOWN;
- break;
case 'A':
case 'B':
case 'C':
case 'D':
case 'E':
case 'F':
+ case 'G':
case 'H':
case 'I':
case 'J':
@@ -1866,16 +1921,6 @@
default:
pri_error(ctrl, "PTP MDL can't handle error of type %c\n", error);
break;
- }
-}
-
-static void q921_restart_ptp_link_if_needed(struct q921_link *link)
-{
- struct pri *ctrl;
-
- ctrl = link->ctrl;
- if (PTP_MODE(ctrl)) {
- q921_mdl_error(&ctrl->link, 'Z');
}
}
@@ -1995,14 +2040,6 @@
pri_error(ctrl, "TEI=%d MDL-ERROR (K): FRMR in state %d(%s)\n",
link->tei, link->state, q921_state2str(link->state));
break;
- case 'Z':
- if (is_debug_q921_state) {
- /* Fake MDL-ERROR to kick start PTP L2 link back up. */
- pri_message(ctrl,
- "TEI=%d MDL-ERROR (Z): Kick starting L2 link in state %d(%s)\n",
- link->tei, link->state, q921_state2str(link->state));
- }
- break;
default:
pri_message(ctrl, "TEI=%d MDL-ERROR (%c): in state %d(%s)\n",
link->tei, error, link->state, q921_state2str(link->state));
@@ -2089,6 +2126,7 @@
q931_dl_event(link, Q931_DL_EVENT_DL_RELEASE_CONFIRM);
stop_t200(link);
q921_setstate(link, Q921_TEI_ASSIGNED);
+ res = q921_ptp_delay_restart(ctrl);
}
break;
default:
@@ -2520,6 +2558,7 @@
if (h->u.p_f)
break;
/* else */
+ restart_timer_stop(ctrl);
q921_establish_data_link(link);
link->l3_initiated = 1;
q921_setstate(link, Q921_AWAITING_ESTABLISHMENT);
@@ -2533,7 +2572,7 @@
q931_dl_event(link, Q931_DL_EVENT_DL_RELEASE_IND);
stop_t200(link);
q921_setstate(link, Q921_TEI_ASSIGNED);
- q921_restart_ptp_link_if_needed(link);
+ res = q921_ptp_delay_restart(ctrl);
break;
case Q921_AWAITING_RELEASE:
if (!h->u.p_f)
@@ -2542,6 +2581,7 @@
q931_dl_event(link, Q931_DL_EVENT_DL_RELEASE_CONFIRM);
stop_t200(link);
q921_setstate(link, Q921_TEI_ASSIGNED);
+ res = q921_ptp_delay_restart(ctrl);
break;
case Q921_MULTI_FRAME_ESTABLISHED:
if (h->u.p_f) {
More information about the libpri-commits
mailing list