<div dir="ltr">ok thanks for support and help <br><br><div class="gmail_quote">2013/3/27 Yves A. <span dir="ltr"><<a href="mailto:yves030@gmx.de" target="_blank">yves030@gmx.de</a>></span><br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div text="#000000" bgcolor="#FFFFFF">
<div>you have already listed the two config
files for using zaptel.<br>
on first sight, they look ok to me (did not use zaptel for years
now)<br>
maybe you should definitely comment out any span that is not in
use... or do the opposite.<br>
i´ve seen this warning several times, but i cant remember it had
anything to do with spans<br>
being configured but not used.<br>
it always had something to do with timing or even defective cards
or cabling or even wrong<br>
settings on providers´ site.<br>
<br>
what changes were made to the system so that these warnings occur?
or have they been <br>
visible from the very start? do they affect telefony (e.g. loss of
calls, one side audio only etc.)?<br>
how much load (concurrent calls) is on the asterisk, does the
warning occur periodically or<br>
only a few times?<br>
these are all questions you should ask yourself to help you find
the answer yourself... it can<br>
be very frustrating sometimes, but for me, thats all i can tell
about.<br>
<br>
regards,<br>
yves<br>
<br>
Am 27.03.2013 13:06, schrieb Salaheddine Elharit:<br>
</div>
<blockquote type="cite"><div><div class="h5">
<div dir="ltr">thank you for your help ,but which configure script
and when i can find this script ? in etc/asterisk
<div><br>
<div><br>
</div>
<div>best regards <br>
<br>
<div class="gmail_quote">2013/3/27 Thorsten Göllner <span dir="ltr"><<a href="mailto:tg@ovm-group.com" target="_blank">tg@ovm-group.com</a>></span><br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div text="#000000" bgcolor="#FFFFFF"> You do use only
span 1 and 6? So the other ports are not plugged? That
is the cause for the warnings. I use a Sangoma
E1-Card. The configure script gives me the option
"unused" for any port. Maybe your configure script
offers you the same option.<br>
<br>
<div>Am 27.03.2013 11:54, schrieb Salaheddine Elharit:<br>
</div>
<div>
<div>
<blockquote type="cite">
<div dir="ltr">Hi
<div><br>
</div>
<div>i use 2 digium cards 1 card with 2 ports
and the second card with 4 ports</div>
<div>
<p class="MsoNormal"> </p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US">but
actually i use just the span 1 and span
6 </span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US">Asterisk
1.4-r110474M</span></p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US">i
use E1 ports</span></p>
<p class="MsoNormal"><span lang="EN-US"><br>
</span></p>
<p class="MsoNormal">zaptel.conf</p>
<p class="MsoNormal"><span lang="EN-US"> </span></p>
<p class="MsoNormal"><span lang="EN-US"></span></p>
<p class="MsoNormal"># Autogenerated by
/usr/sbin/zapconf on Wed Feb 20 10:13:17
2013 -- do not hand edit</p>
<p class="MsoNormal"> # Zaptel Configuration
File</p>
<p class="MsoNormal">#</p>
<p class="MsoNormal"># This file is parsed
by the Zaptel Configurator, ztcfg</p>
<p class="MsoNormal">#</p>
<p class="MsoNormal"># Span 1: TE4/0/1
"T4XXP (PCI) Card 0 Span 1" (MASTER)
HDB3/CCS RED</p>
<p class="MsoNormal">span=1,1,0,ccs,hdb3</p>
<p class="MsoNormal"># termtype: te</p>
<p class="MsoNormal">bchan=1-15,17-31</p>
<p class="MsoNormal">dchan=16</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal"># Span 2: TE4/0/2
"T4XXP (PCI) Card 0 Span 2" HDB3/CCS RED</p>
<p class="MsoNormal">span=2,2,0,ccs,hdb3</p>
<p class="MsoNormal"># termtype: te</p>
<p class="MsoNormal">bchan=32-46,48-62</p>
<p class="MsoNormal">dchan=47</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal"># Span 3: TE4/0/3
"T4XXP (PCI) Card 0 Span 3" </p>
<p class="MsoNormal"># span=3,3,0,ccs,hdb3</p>
<p class="MsoNormal"># termtype: te</p>
<p class="MsoNormal"># bchan=63-77,79-93</p>
<p class="MsoNormal"># dchan=78</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal"># Span 4: TE4/0/4
"T4XXP (PCI) Card 0 Span 4" </p>
<p class="MsoNormal"># span=4,4,0,ccs,hdb3</p>
<p class="MsoNormal"># termtype: te</p>
<p class="MsoNormal"># bchan=94-108,110-124</p>
<p class="MsoNormal"># dchan=109</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal"># Span 5: TE2/1/1
"T2XXP (PCI) Card 1 Span 1" </p>
<p class="MsoNormal">span=5,5,0,ccs,hdb3</p>
<p class="MsoNormal"># termtype: te</p>
<p class="MsoNormal">bchan=125-139,141-155</p>
<p class="MsoNormal">dchan=140</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal"># Span 6: TE2/1/2
"T2XXP (PCI) Card 1 Span 2" </p>
<p class="MsoNormal">span=6,6,0,ccs,hdb3</p>
<p class="MsoNormal"># termtype: te</p>
<p class="MsoNormal">bchan=156-170,172-186</p>
<p class="MsoNormal">dchan=171</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal"># Global data</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal">loadzone<span style="white-space:pre-wrap"> </span>=
us</p>
<p class="MsoNormal">defaultzone<span style="white-space:pre-wrap"> </span>=
us</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal">etc/asterisk/zapata.conf</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal">[channels]</p>
<p class="MsoNormal">context=default</p>
<p class="MsoNormal">hidecallerid=no</p>
<p class="MsoNormal">callwaiting=yes</p>
<p class="MsoNormal">usecallingpres=yes</p>
<p class="MsoNormal">callwaitingcallerid=yes</p>
<p class="MsoNormal"> threewaycalling=yes</p>
<p class="MsoNormal">transfer=yes</p>
<p class="MsoNormal">canpark=yes</p>
<p class="MsoNormal">cancallforward=yes</p>
<p class="MsoNormal">callreturn=yes</p>
<p class="MsoNormal">rxgain=0.0</p>
<p class="MsoNormal"> txgain=0.0</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal">group=1</p>
<p class="MsoNormal">switchtype=euroisdn</p>
<p class="MsoNormal">signalling=pri_cpe</p>
<p class="MsoNormal">callgroup=1</p>
<p class="MsoNormal">pickupgroup=1</p>
<p class="MsoNormal">immediate=no</p>
<p class="MsoNormal">channel =>
1-15,17-31</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal">group=2</p>
<p class="MsoNormal">callgroup=2</p>
<p class="MsoNormal">switchtype=qsig</p>
<p class="MsoNormal">signalling=pri_net</p>
<p class="MsoNormal">callerid=mycallerid</p>
<p class="MsoNormal">immediate=no</p>
<p class="MsoNormal">channel => 156-170</p>
<p class="MsoNormal">channel => 172-176</p>
<p class="MsoNormal"> channel => 125-139</p>
<p class="MsoNormal">channel => 141-155</p>
<p class="MsoNormal"><br>
</p>
<p class="MsoNormal">thanks and regards</p>
<p class="MsoNormal"><br>
</p>
<br>
<div class="gmail_quote">2013/3/27 Yves A. <span dir="ltr"><<a href="mailto:yves030@gmx.de" target="_blank">yves030@gmx.de</a>></span><br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div text="#000000" bgcolor="#FFFFFF">
<div>
<div>Am 26.03.2013 17:57, schrieb
Salaheddine Elharit:<br>
</div>
</div>
<blockquote type="cite">
<div dir="ltr">Hello,
<div>
<div>
<div><br>
</div>
<div> i have all the time this
warning i use asterisk 1.4
all works without issue i
don't have any problem (i
can use the inbound and
outbound calls without
issue)</div>
<div>
<div><br>
</div>
<div>i just want to know
what is this WARNING</div>
<div><br>
</div>
<div>thanks and regards</div>
<div><br>
</div>
<div><br>
</div>
<div> WARNING[28151]:
chan_zap.c:2404
pri_find_dchan: No
D-channels available!
Using Primary channel 140
as D-channel anyway!</div>
</div>
</div>
</div>
</div>
</blockquote>
<br>
this can have different causes...
mostly a wrong setting in your zaptel
configuration file... this could be
e.g.<br>
mixing american / european settings
(e1/t1), <br>
wrong timing settings,<br>
wrong master / source clock setting,<br>
[...]<br>
post more details... what span (e1 or
t1), which hardware, driver version,
asterisk version, config files...<br>
<br>
<br>
regards,</div>
</blockquote>
</div>
</div>
</div>
</blockquote>
<br>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</div>
</div>
</div>
<br>
<fieldset></fieldset>
<br>
</div></div><div class="im"><pre>--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --
New to Asterisk? Join us for a live introductory webinar every Thurs:
<a href="http://www.asterisk.org/hello" target="_blank">http://www.asterisk.org/hello</a>
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
<a href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a></pre>
</div></blockquote>
<br>
</div>
<br>--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
New to Asterisk? Join us for a live introductory webinar every Thurs:<br>
<a href="http://www.asterisk.org/hello" target="_blank">http://www.asterisk.org/hello</a><br>
<br>
asterisk-users mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br></blockquote></div><br></div>