<div dir="ltr"><div>Hi,<br><br></div>I configured Asterisk 10 for inbound fax, for couple of weeks I didn't see any issues until today. The setup I configured for inbound fax is quite simple i.e. Cisco Voice GW sends the fax calls to Asterisk using T.38 protocol and later Asterisk stores/forwards the fax to specific end user. <br clear="all">
<div><div><br></div><div>The configuration I made in sip.conf for enabling T38 is listed below;<br><br>t38pt_udptl = yes,fec,maxdatagram=400<br>faxdetect = t38 <br><br></div><div>And in udptl.conf, I just uncommented 'use_even_ports = yes<br>
</div><div>;' and rest of it set as default.<br><br><br></div><div>Here is the error I'm usually seeing in Asterisk side;<br><br>[Jan 15 14:13:28] NOTICE[20514] udptl.c: UDPTL (SIP/10.3.22.6-00000ad6): Transmission error to <a href="http://10.3.22.6:18428">10.3.22.6:18428</a>: Resource temporarily unavailable<br>
<br></div><div>If this notice comes, it occurs repeatedly unless I need to restart the asterisk service. For some reason it also effect the V-GW.<br><br></div><div>Please advise what is the reason that I'm getting this message and how can I avoid it?<br>
</div><div><br></div><div><br>-- <br>Regards,<br><br>Ahmed Munir Chohan<br><br>
</div></div></div>