Hi,<div><br></div><div>I am using Red Hat Enterprise Linux 5.5 (32bit) and Asterisk 1.8.12, Dahdi 2.4.1.2 and libpri 1.4.2. The installations is fine. But in the Asterisk CLI prompt the pri commands are missing, only the pri intense debug span is populated. Even if i execute that command it results me to "pri set debug 2 span 1 is not a valid command"</div>
<div><br></div><div>Any assistance would be appreciated.</div><div><br></div><div>Regards,</div><div>Gopal. </div>