<pre style="line-height:17px;white-space:normal;color:rgb(42,42,42);font-size:13px;background-color:rgb(255,255,255)">On 2012-05-25 16:47, jose carlos de souza wrote:<br>> Hi,<br>><br>> I need help.<br>><br>> Sorry for my bad english, i'm from Brasil. And just starting to leran<br>
> Linux because of Asterisk.<br>><br>> I want to configure Asterisk 1.8 with ipv6 in my Lan network at home.<br>><br>> I've done a clean install of it and SIP clients it's working well in my<br>> home with Ipv4 (execept of the bad quality of the voice, that it's<br>
> coming out, but that's not important, what i relly want to see it's ipv6<br>> working)<br>><br>> I'm using Debian 6.0.4 on a Virtual machine (VMware), Linphone 3.5.2 as<br>> my SIP client and a Router DIR-600 from D-LINK as DHCP sever to my LAN<br>
> networking. (With a DHCP IP Address Range of: 192.168.0.100 to<br>> 192.168.0.199)<br>><br>> What i change in configurations to work with ipv6 was:<br>> 1<br>><br>> change my network interfaces in /etc/network/interfaces , i add this:<br>
><br>> iface eth0 inet6 static<br>> addres fe80::c0a8:6e<br>> netmask 64<br>> gateway fe80::c0a8:1<br>> ---------------------------------------------------------------------<br>> 2<br>><br>> Change sip.conf<br>
><br>> UDPbindaddr = ::<br>><br>> TCPbindaddr = ::<br>> ------------------------------------------------------------------------------------------------<br>> 3<br>><br>> On Linphone check the box "use IPv6 insted of IPv4"<br>
><br>> Your SIP Identity: sip:9005@fe80::c0a8:6e></pre><pre style="line-height:17px;white-space:normal;color:rgb(42,42,42);font-size:13px;background-color:rgb(255,255,255)">>I alredy put the brackets. Like: 9006@[fe80::c0a8:6e] and still dosent work.</pre>
<pre style="line-height:17px;white-space:normal;color:rgb(42,42,42);font-size:13px;background-color:rgb(255,255,255)"><pre style="white-space:normal">> I'm calling from a windows 7(the one with the virtual machine on it) to<br>
> another windows 7 both with dual-stack ip protocol, and both are in my<br>> LAN network.<br>><br>> The call's only works when i use the IPv4. for example:<br>> when my linphone its configure to <a href="mailto:sip%3A9005@192.168.0.102">sip:9005@192.168.0.102</a> and Proxy<br>
> addres: 192.168.0.10.<br>><br>> I have created on Asterisk 10 SIP extensions, 9001 to 9010 on.<br>><br>> --------------------------------------------------------------------------------------------------<br>
><br>> I whant to know what im doing wrong.<br>><br>> Or what files do i have to changes and where are they located? Wicth<br>> changes should i made?<br>><br>> Thanks for the attention and help.</pre>
</pre><div><br></div>-- <br><div><font color="#3366ff">José Carlos</font></div><div><font color="#3366ff">Fone: 9292-9880 (OI)</font></div><br>