<div dir="ltr">Yeah sorry for that, I realized something is missing after I sent the email, but it is exactly what I have (other than order here, which doesn't really matter: you posted ami,te,term, I have ami,term,te). <br>
Actually I had couple technicians from digium look at it and they said BT equipements is not responding to the card within a certain range that the card is looking for (i'm not sure what range but I do believe too it's a BT issue), But I have run all the couple command that Patrick suggested (to double check), tested again and still same kind of errors.<br>
But Thank you very much Patrick for the guide, I was looking for that it's been a couple days!!<br>I just hope someone that has the exact same issue or someone with previous BT experience see this and help :) ..we never know :) !<br>
<br><div class="gmail_quote">On Wed, May 9, 2012 at 2:40 PM, Patrick Lists <span dir="ltr"><<a href="mailto:asterisk-list@puzzled.xs4all.nl" target="_blank">asterisk-list@puzzled.xs4all.nl</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="HOEnZb"><div class="h5">On 09-05-12 19:54, khalid touati wrote:<br>
> Thank you for your answer, I think I posted dhadi version and so but<br>
> let me add more details and recap them below:<br>
><br>
> We are using asterisk 1.8.12.0 with dahdi 2.6.0, on CentOS 6.2. it's a<br>
> digium card 1HA8-0400BLF<br>
><br>
> output of dahdi_hardware: pci:0000:04:08.0 wctdm24xxp+ d161:8008<br>
> HB8-0000<br>
><br>
> From BT side: it is called by BT a "system access" ISDN2 BRI (per BT NT<br>
> mode and signaling as PTP)<br>
><br>
> chan_dahdi.conf<br>
><br>
> ; Span 1: WCBRI/0/0 "HB8-0000" (MASTER) AMI/CCS<br>
> group=1,11<br>
> context= mainmenu<br>
> switchtype = euroisdn<br>
> signalling = bri_cpe<br>
> channel => 1-2<br>
> context = default<br>
> group = 63<br>
><br>
> ; Span 2: WCBRI/0/1 "HB8-0000" AMI/CCS<br>
> group=1,12<br>
> context=mainmenu<br>
> switchtype = euroisdn<br>
> signalling = bri_cpe<br>
> channel => 4-5<br>
> context = default<br>
> group = 63<br>
><br>
> ; Span 3: WCBRI/0/2 "HB8-0000" AMI/CCS<br>
> group=1,13<br>
> context=mainmenu<br>
> switchtype = euroisdn<br>
> signalling = bri_cpe<br>
> channel => 7-8<br>
> context = default<br>
> group = 63<br>
><br>
> ; Span 4: WCBRI/0/3 "HB8-0000" AMI/CCS<br>
> group=1,14<br>
> context=mainmenu<br>
> switchtype = euroisdn<br>
> signalling = bri_cpe<br>
> channel => 10-11<br>
> context = default<br>
> group = 63<br>
><br>
</div></div>> the error when placing a call : *Span: 4 TEI=0 MDL-ERROR (J): N(R) error<br>
> in state 7(Multi-frame established)<br>
> *<br>
> Thank you!!<br>
<br>
You did not provide system.conf. Do you have something like this (may<br>
have errors, I did not check):<br>
<br>
loadzone = uk<br>
defaultzone = uk<br>
span => 1,1,0,ccs,ami,te,term<br>
bchan = 1,2<br>
hardhdlc = 3<br>
<br>
span => 2,2,0,ccs,ami,te,term<br>
bchan = 4,5<br>
hardhdlc = 6<br>
<br>
span => 3,3,0,ccs,ami,te,term<br>
bchan = 7,8<br>
hardhdlc = 9<br>
<br>
span => 4,4,0,ccs,ami,te,term<br>
bchan = 10,11<br>
hardhdlc = 12<br>
<br>
<br>
Then as root:<br>
modprobe wctdm23xxp<br>
<br>
And as root:<br>
dahdi_cfg -vvv<br>
<br>
And check if all is well (green leds, happy messages in<br>
/var/log/messages, etc.).<br>
<br>
<br>
Then in chan_dahdi.conf use something like:<br>
<br>
;BRI Module<br>
group = 1<br>
signalling = bri_cpe<br>
context = incoming<br>
channel => 1,2,4,5,7,8,10,11<br>
<br>
Your chan_dahdi.conf has "group" and "context" multiple times and that<br>
does not seem right (admittedly it's been ages since I setup a Digium card).<br>
<br>
Hope this helps. If not follow the installation manual step for step or<br>
call Digium support.<br>
<br>
<a href="http://docs.digium.com/H8/hx8_series_manual.pdf" target="_blank">http://docs.digium.com/H8/hx8_series_manual.pdf</a><br>
<div class="HOEnZb"><div class="h5"><br>
Regards,<br>
Patrick<br>
<br>
--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
New to Asterisk? Join us for a live introductory webinar every Thurs:<br>
<a href="http://www.asterisk.org/hello" target="_blank">http://www.asterisk.org/hello</a><br>
<br>
asterisk-users mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>
</div></div></blockquote></div><br><br clear="all"><br>-- <br>Khalid Touati<br>Network Administrator at Endosoft, LLC<br>CCNA<br><a value="+15185734741"><br></a><br>
</div>