<div class="gmail_quote">On Fri, Jan 6, 2012 at 10:01 AM, Benny Amorsen <span dir="ltr"><<a href="mailto:benny%2Busenet@amorsen.dk">benny+usenet@amorsen.dk</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="im">David Backeberg <<a href="mailto:dbackeberg@gmail.com">dbackeberg@gmail.com</a>> writes:<br>
<br>
> Thanks for clearing that up. I was getting all excited that I could<br>
> flash the PAP2T; I've always used regular voice tones over SIP with<br>
> the PAP2Ts.<br>
<br>
</div>SPA-2102 supports T.38. If you ignore the WAN-port, it is practically a<br>
PAP2T. The only time you cannot ignore the WAN-port is when doing<br>
provisioning.</blockquote><div><br>I ignore the LAN (yellow) port and only use the WAN (blue) port. The LAN port has a DHCP server enabled by default. The WAN port is setup with a DHCP client. The good thing about using the WAN port is if the settings are cleared you won't have an unknown DHCP server on your network.<br>
<br>I plug a phone in and dial the below. Then you can configure the rest from the web interface.<br><br>**** to enter admin ivr<br>7932 enter 1 to enable web interface<br>110 will read the WAN address<br><br></div></div>
Ryan<br>