Happy day to ya list!<div><br></div><div>I've recently deployed an update on our Asterisk server, taking it from 1.2 up to 1.8.5 - going from zaptel to dahdi. Excitement levels are high and performance so far is wonderful.</div>
<div><br></div><div>The issue I have is I've purchased several G729 licenses, registered them, installed the module in asterisk (per instructions) and for most calls they work wonderfully.</div><div><br></div><div>Inbound calls through the PRI however are forcing ulaw as the codec! I noticed this as all of my phones are currently set to Disallow:All, Allow:G729,gsm. (This was the same configuration with Asterisk 1.2/Zaptel). When an inbound call arrives my logs fill up with:</div>
<div><div>chan_sip.c: Asked to transmit frame type ulaw, while native formats is 0x100 (g729) read/write = 0x100 (g729)/0x100 (g729)</div></div><div><br></div><div>These did not appear with Asterisk 1.2/Zaptel. I have reviewed the Dahdi settings and have found nothing relating to the codec being passed or how to force it to use the codecs I've purchased.</div>
<div><br></div><div>Any suggestions on where this might be set for inbound calls? (Outbound calls, SIP to SIP and SIP to IAX2 to SIP are all using G729 - this only relates to an inbound call from an external land line).</div>
<div><br></div><div><br></div>