<HTML><HEAD></HEAD>
<BODY>
<DIV dir=ltr id=idOWAReplyText42510>
<DIV dir=ltr><FONT color=#000000 size=2 face=Arial>If this is what you need (fax/SIP/SIP Trunking/Vmail to email/Fax to email) and are willing to run on real hardware, or a virtual machine (not an embedded device), look in to PBX in a Flash along with IncrediblePBX/IncredibleFAX addon. This setup will do everything you want, and then some. It may take you a few weeks to setup and tweak to your liking, but once it's up and running, you won't look back.</FONT></DIV>
<DIV dir=ltr><FONT size=2 face=Arial>I cut my phone bill from $58/mnth for POTS with a few services to ~$4/mnth with everything under the sun. That savings has enabled me to buy SIP hardphones for around the house, and of course every laptop, netbook & smartphone has a client installed.</FONT></DIV>
<DIV dir=ltr><FONT size=2 face=Arial>We both have DISA enabled and our access line programmed as a "MY5" number, and we route all of our calls through the server at home. My cell bill went from ~$100/mnth to $48.50.</FONT></DIV>
<DIV dir=ltr><FONT size=2 face=Arial></FONT> </DIV>
<DIV dir=ltr><FONT size=2 face=Arial>Don't skimp on the hardware, use a pc (any old P4 with 512-1G of RAM will do), embedded devices just don't have the horsepower to make a featured Asterisk server shine.</FONT></DIV>
<DIV dir=ltr> </DIV></DIV>
<DIV dir=ltr><BR>
<HR tabIndex=-1>
<FONT size=2 face=Tahoma><B>From:</B> Linuxguy123<BR><B>Sent:</B> Wed 8/24/2011 10:49 AM<BR><B>To:</B> skchopperguy@gmail.com; Asterisk Users Mailing List - Non-Commercial Discussion<BR><B>Subject:</B> Re: [asterisk-users] Looking for ideas for nice **Asterisk** home phone system<BR></FONT><BR></DIV>
<DIV><PRE style="WORD-WRAP: break-word">On Tue, 2011-08-23 at 21:36 -0700, Skyler wrote:
> Hi,
>
> On Tue, 2011-08-23 at 21:50 -0600, Linuxguy123 wrote:
> > So you have asterisk loaded on a wireless router ? Linksys 54G by
> > chance ?
> >
> Yes, Asterisk at the moment. Cisco E3000. 54G is too small for
> asterisk, not enough flash/cpu.
OK. I'm a 54G guy. I just bought a E4200 the other day for our media
network.
> > Which VOIP phones are you using ? Which ATA are you using ?
> >
> I have Aastra 6731i, PAP2T, HT286 a Polycom and an Snom unit. Linphone,
> Bria, jitsi work as well for PC/Mac/iPhone. Any voip device/software
> would work.
OK.
> The wife uses call-through on her Blackberry with MY10, she adds
> contacts with a pause after her voxnumber; like
> 1NPANXXXXXX,personsnumber so it dials in then dials out on the trunk. We
> have unlimited 60 countries so we can literally call anywhere, from
> anywhere and never have to think about it.
Our plans have free local calling and 20 cents a minute for "long
distance". I spent $80 last week on "long distance" that would have
been $12 on our home plan. To say nothing of all the other benefits.
> Took me 6 months here-and-there to get it this far. Well worth it
> though as we save about $180/month in cell phone bills now between us.
Right.
Are you using a POTS connection or SIP provider for your phone system ?
> > How big is the system ? (number of lines, users, etc.)
> >
> Just family and tinkering. I had load tested it with SIPp simulating 10
> concurrent calls, sat at a steady 93% cpu. I'd say the E3000 would
> suffice for home use, 2-3 concurrent users. We stream off the NAS
> through it also and don't even notice during a call.
Sounds perfect.
> > How does a wireless router handle voicemail ? Ie no hard drive, so
> > where does it store it ? NAS ?
> >
> It records to memory (flash) and sends a wav to email. Fax works the
> same way.
:drool: So you can receive faxes that arrive at home on the road then,
as an email attachment, right ? Without having to find a fax machine
while traveling and coordinating with the sender ?
If we wanted faxes received on the fax machine, can asterisk recognize a
fax tone and route the call to the fax machine ?
Will the fax machine send via an analog connection to the asterisk
system ? Or does it need its own line directly out ?
What information resources did you use when setting up your system ?
Thanks again for the replies.
LG
--
_____________________________________________________________________
</PRE></DIV></BODY></HTML>