I am using Sangoma hardware, so I do not think fxotune applies here. <br>
<br>
I tried it anyway, no change.<br>
<br>
If I set an extension to dtmfmode=info and add the same in chan_dahdi, no calls will go out at all.<br>
<br>
If I set an extension to dtmfmode=auto and leave dtmfmode=info in chan_dahdi, no calls will go out<br>
<br>
If I set an extension to dtmfmode=rfc2833 and and add the same in
chan_dahdi, some calls will go out (About 30%) and remote ivr's will
sometimes work (About 30%).<br>
<br>
If I set an extension to dtmfmode=rfc2833 and add dtmfmode=info in
chan_dahdi, this gives me the best result which is still pretty bad, I'd
say 50% of the calls will go out and 50% get the AT&T operator
saying "The call not be completed as dialed". Remote ivr's work about
70% of the time.<br>
<br>
In all the above, adding toneduration=300 and relaxdtmf=y or n in chan_dahdi, made absolutely no difference.<br>
<br>
What I'm confused with is I have an identical setup at another office with no problems!<br>
<br>
Is there anyway to see what asterisk is dialing out? I can see the extension using asterisk -r and the number shown is correct. <br>
<br>I am still thinking it has something to do with the phones. I may have to go onsite and try a phone with older firmware or maybe a softphone. <br><br><b>----- Original Message -----</b><br>
<b>From:</b> vmedina@apcn.net [mailto:vmedina@apcn.net]<br>
<b>To:</b> asterisk-users@lists.digium.com<br>
<b>Sent:</b> Wed, 29 Jun 2011 13:37:41 -0400 (EDT)<br>
<b>Subject:</b> Re: [asterisk-users] Polycom ip320 dtmf issues<br><br>
<div><p>In free pbx it is set to rfc... I tried inband and it works better but then dialing out became a bigger problem.<br><br><font color="#888888">Sent from my android device.</font><br><br>-----Original Message-----<br>From: Adam Moffett <<a href="mailto:adamlists@plexicomm.net" target='_blank'>adamlists@plexicomm.net</a>><br>To: Asterisk Users Mailing List - Non-Commercial Discussion <<a href="mailto:asterisk-users@lists.digium.com" target='_blank'>asterisk-users@lists.digium.com</a>><br>Sent: Wed, 29 Jun <a href="tel:201112" target='_blank'>2011 12</a>:37 PM<br>Subject: Re: [asterisk-users] Polycom ip320 dtmf issues<br><br>Which dtmf method?<br><br>I think we use inband here without issue.<br><br>I am dtmf recognition issues. Out bound calls go though dahdi trunk/sangoma a400. Dtmf tones are not being recognized. Is there any issues with the latest polycom firmware? <br><br><font>Sent from my android device.</font><br><br>-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target='_blank'>http://www.api-digital.com</a> -- New to Asterisk? Join us for a live introductory webinar every Thurs: <a href="http://www.asterisk.org/hello" target='_blank'>http://www.asterisk.org/hello</a> asterisk-users mailing list To UNSUBSCRIBE or update options visit: <a href="http://lists.digium.com/mailman/listinfo/asterisk-users" target='_blank'>http://lists.digium.com/mailman/listinfo/asterisk-users</a> <br><br><br></p>
</div>