<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
Hi,<br>
<br>
"pri show version" should show you something like that:<br>
libpri version: 1.4.11.4<br>
<br>
loadzone should be "de".<br>
<br>
Better you configure your system with the help of "./Setup dahdi"
(which can be found in your wanpipe-source-directory). Or after
installation you can change config files (as root) with "<code>wancfg_dahdi</code><code>"
(should be found in /usr/sbin)</code>.<br>
<br>
Best regards,<br>
-Thorsten-<br>
<br>
Am 31.05.2011 00:29, schrieb bilal ghayyad:
<blockquote cite="mid:93957.43867.qm@web162001.mail.bf1.yahoo.com"
type="cite">
<pre wrap="">Hi All;
>From the CLI, if I typed pri then I can find the command and the relative commands for it .. does this mean that the libpri is installed well? How can I be sure that Asterisk took the libpri and it is functioning?
Now, regarding to the PRI configurations:
The provider is using: ISDN PRI E1, hdb3 and they disable the CRC4
At the /etc/dahdi/system.conf I added the following:
span=1,1,0,ccs,hdb3,yellow
bchan=1-15,17-31
dchan=16
I have a question, as I am using E1 so it is a wrong to use a loadzone us? Because us is using T1 and not E1?
At the /etc/asterisk/chan_dahdi.conf I added the following:
context=Incoming
group=0
signaling=pri_net (and really I do not know if I have to use pri_cpe)
switchtype=euroisdn
channel=>1-15,17-31
Well, Do I miss any thing?
What commands that can help me to know if I have hardware failure in the card, if the E1 is UP or not?
Your kindly help is highly appreciated.
Regards
Bilal
</pre>
</blockquote>
</body>
</html>