Hello Bobola, I&#39;m using a Sangoma card with Siemens HiPath 3750 with ISDN Protocol with configurations below:<br><br>Asterisk:<br>#zaptel.conf<br>span=1,1,0,ccs,hdb3,crc4<br>bchan=1-15,17-31<br>dchan=16<br>loadzone=us<br>
defaultzone=us<br><br>#zapata.conf<br>[trunkgroups]<br><br>[channels]<br>language=pt_BR
<br>context=default<br>switchtype=euroisdn<br>pridialplan=unknown<br>prilocaldialplan=unknown<br>facilityenable = yes<br>signalling=pri_cpe<br>;rxwink=300<br>usecallerid=yes<br>hidecallerid=no<br>callwaiting=yes<br>usecallingpres=yes
<br>restrictcid=no<br>callwaitingcallerid=yes<br>threewaycalling=yes<br>transfer=yes<br>canpark=yes<br>cancallforward=yes<br>callreturn=yes<br>echocancel=yes<br>echocancelwhenbridged=yes<br>rxgain=0.0<br>txgain=0.0<br>group=1
<br>callgroup=1<br>immediate=no<br>callerid=asreceived<br>musiconhold=default<br>group=1<br>channel=&gt;1-15<br>channel=&gt;17-31<br><br>In HiPath 3750 verify the fields:<br>Line/Network ---&gt; Trunks ---&gt; Parameters (inside the slot/trunk) ---&gt;ISDN Flags ---&gt; Protocol Description ---&gt; T1/S2M: Euro-Amt PP (with CRC4) in your case, but I don&#39;t use CRC4 so my configuration is T1/S2M: Euro-Amt PP without CRC, OK?<br>
I hope this information help you.<br><br>Best Regards<br><br>Josue<br><br><div class="gmail_quote">2011/3/10 Bobola Oke <span dir="ltr">&lt;<a href="mailto:okebobola@gmail.com">okebobola@gmail.com</a>&gt;</span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hello all,<br><br>I am trying to connect asterisk to a Siemens Hipath 3750 PBX system. <br><br>I have a physical connection issue. I know that I should use a crossover RJ48 cable to link the two systems. The problem however is that the physical interface of the Siemens system is very unfamiliar. From my digging around, I think that this is an S2M interface. <a href="http://www.mail-archive.com/asterisk-users@lists.digium.com/msg86298.html" target="_blank">http://www.mail-archive.com/asterisk-users@lists.digium.com/msg86298.html</a><br>

<br><br>Please any suggestions on how to go about this?<br><br>Thanks<br>
<br>--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
New to Asterisk? Join us for a live introductory webinar every Thurs:<br>
               <a href="http://www.asterisk.org/hello" target="_blank">http://www.asterisk.org/hello</a><br>
<br>
asterisk-users mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
   <a href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br></blockquote></div><br>