Hi Everyone,<div><br></div><div>Configuring a Polycom conference bridge IP 5000 to connect to Asterisk. For some reason I don't see any SIP packets coming in to Asterisk at all. I don't want to use XML or ftp etc for now and just use the Web Interface to get it going with basic features. But the Web UI is a bit confusing with SIP and Line tabs.</div>
<div><br></div><div>I have put this on the web interface:</div><div><br></div><div>SIP > Outbound Proxy:</div><div>Address = 192.168.0.2</div><div>Port = 5060</div><div><br></div><div>Server 1:</div><div>Address = 192.168.0.2</div>
<div>Port = 5060</div><div>Transport = DNSnaptr</div><div>Expires = 300</div><div>Register = 1</div><div><br></div><div>Line:</div><div>Display Name = 100</div><div>Address = 192.168.0.2</div><div>Authentication User ID = 100</div>
<div>Authentication Password = *************</div><div>Label = 100</div><div><br></div><div><div>Server 1:</div><div>Address = 192.168.0.2</div><div>Port = 5060</div><div>Transport = DNSnaptr</div><div>Expires = 300</div>
<div>Register = 1</div></div><div><br></div><div>I don't see any registration attempts but Snom phones on the same network can register to Asterisk just fine.</div><div><br></div><div>Thanks</div>