<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'>
Thanks!<div><br></div><div><br></div><div>I am from Brasil and intend to use mfc r2 and now I have following conditions:</div><div><br></div><div><div>Digium Wildcard TE110P T1/E1 Card 0 RED 0 0 0 CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)</div><div>Wildcard TDM410P Board 1 OK 0 0 0 CAS Unk 0 db (CSU)/0-133 feet (DSX-1)</div><div><br></div><div> look like good!</div><div><br></div><div>The only thing strange is that dahdi-channels.conf donīt appear after dahdi_genconf command. Is it indispensable?</div><div><br></div><div><br></div><br>Att,<br>
<br>
Flavio Roberto Miranda<br>
MSN:flaviormiranda@hotmail.com<br>Skype: flaviormiranda<br><br><br><br>> Date: Sun, 10 Oct 2010 00:58:48 -0500<br>> From: sruffell@digium.com<br>> To: asterisk-users@lists.digium.com<br>> Subject: Re: [asterisk-users] Dahdi missing<br>> <br>> On 10/10/10 12:11 AM, Flavio Miranda wrote:<br>> ><br>> > Actully, my system.conf in /etc/dahdi was wrong or at least ,<br>> > imcomplete. I am trying for a long time to configure one TDM 410p board<br>> > and one TE110p om the server . so far without success!<br>> ><br>> <br>> In my opinion, the easiest way to get jump started is with dahdi_genconf <br>> that is installed as part of the dahdi-tools package.<br>> <br>> 1) Assuming you are not in North America you most likely want lines like <br>> "options wctdm24xxp companding=alaw" and "options wcte11xp <br>> t1e1override=1" in /etc/modprobe.d/dahdi.conf.<br>> <br>> 2) modprobe wcte12xp && modprobe wctdm24xxp (make sure the order here <br>> matches the order in /etc/dahdi/modules)<br>> <br>> 3) run dahdi_genconf. This will create /etc/dahdi/system.conf and an <br>> /etc/asterisk/dahdi-channels.conf that you can use in your <br>> chan_dahdi.conf (either copy / or include).<br>> <br>> 4) OPTIONAL but recommended: Comment out all the other drivers in <br>> /etc/dahdi/modules (leaving only wcte11xp and wctdm24xxp)<br>> <br>> 5) '/etc/init.d/dahdi restart' and run dahdi_scan to make sure all the <br>> expected channels came up.<br>> <br>> You may have to tweak the settings some and most definitely will if <br>> you're using the TE110P as an interface to a channel bank (but I doubt <br>> you are if you also have a TDM410 installed). But at least you'll have <br>> a good start at this point.<br>> <br>> -- <br>> Shaun Ruffell<br>> Digium, Inc. | Linux Kernel Developer<br>> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA<br>> Check us out at: www.digium.com & www.asterisk.org<br>> <br>> -- <br>> _____________________________________________________________________<br>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --<br>> New to Asterisk? Join us for a live introductory webinar every Thurs:<br>> http://www.asterisk.org/hello<br>> <br>> asterisk-users mailing list<br>> To UNSUBSCRIBE or update options visit:<br>> http://lists.digium.com/mailman/listinfo/asterisk-users<br></div> </body>
</html>