<span class="Apple-style-span" style="font-family: 'Segoe UI', Tahoma, Verdana, Arial, sans-serif; font-size: 13px; color: rgb(68, 68, 68); "><pre style="white-space: normal; ">Hi Guys,<br><br>An 8 channel Astribank is connected to Trixbox 2.8 and I ran freepbx-module-zapauto but I get the following when running these commands and can't make calls out:<br>
<br>[Trixbox]# dahdi_genconf xpporder<br>/usr/sbin/dahdi_genconf: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc<br><br>pbx*CLI> dahdi show channels<br>Chan Extension Context Language MOH Interpret Blocked State<br>
pseudo default default In Service<br>1 from-pstn default In Service<br>2 from-pstn default In Service<br>3 from-pstn default In Service<br>4 from-pstn default In Service<br>5 from-pstn default In Service<br>6 from-pstn default In Service<br>
7 from-pstn default In Service<br>8 from-pstn default In Service<br><br>pbx*CLI> dahdi show status<br>Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO<br>Xorcom XPD #00/00: FXO OK 0 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1)<br>
<br><br>pbx*CLI> dahdi show regdump 1<br>Unable to get registers on channel 1<br>Unable to get stats on channel 1<br><br>[Trixbox]# dahdi_hardware -v<br>/usr/sbin/dahdi_hardware: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc<br>
usb:002/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware<br>LABEL=[usb:X1044207] CONNECTOR=@usb-0000:00:1d.7-4<br>XBUS-00/XPD-00: FXO (8) Span 1 DAHDI-SYNC<br><br><br>Note: This Astribank is deployed in United Arab Emirates and I am not sure what the line type is in terms of Ground or Loop start and wondering if that makes a difference with the Astribank and the fact that it can't how the voltage using "show regdump"<br>
<br>And I am definitly not sure what that warning of OLD DRIVER is about. Any help is appreciated.<br><br><br>Thanks,<br><br><br></pre></span>