<div>Hi Guys,</div><div><br></div><div>Running the following with a Sangoma A101D PRI card:</div><div><br></div><div><div><b>Asterisk 1.4.21.2</b></div><div><b>LibPRI version: 1.4.10</b></div><div><br></div><div><div>No inbound or outbound calls can be made. In fact Asterisk CLI doesn't show any activity. Problem goes away on restart of the system or maybe asterisk.</div>
<div>I see post about upgrading Libpri to 1.4.10.2 and then I see posts that even that didn't work. Anyone can weigh in this please?</div></div></div><div><br></div><div>tail -f /var/log/asterisk/full</div><div><b>[2010-05-17 13:45:28] ERROR[8212] chan_zap.c: Asked to delete sched id -1???</b></div>
<div><b>[2010-05-17 13:45:28] ERROR[8212] chan_zap.c: No more room in scheduler</b></div><div><br></div><div><br></div><div>pri debug span 1 (repeats continuously):</div><div><div><b>-- Got SABME from network peer.</b></div>
<div><b>Sending Unnumbered Acknowledgement</b></div><div><br></div><div><br></div><div>pri intense debug span 1 (repeats continuously):</div><div><div><b>< [ 02 01 7f ]</b></div><div><b>pbx*CLI></b></div><div><b>< Unnumbered frame:</b></div>
<div><b>< SAPI: 00 C/R: 1 EA: 0</b></div><div><b>< TEI: 000 EA: 1</b></div><div><b>< M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ]</b></div><div><b>< 0 bytes of data</b></div>
<div><b>Handling message for SAPI/TEI=0/0</b></div><div><b>-- Got SABME from network peer.</b></div><div><b>Sending Unnumbered Acknowledgement</b></div><div><b><br></b></div><div><b>> [ 02 01 73 ]</b></div><div><b><br>
</b></div><div><b>> Unnumbered frame:</b></div><div><b>> SAPI: 00 C/R: 1 EA: 0</b></div><div><b>> TEI: 000 EA: 1</b></div><div><b>> M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]</b></div>
<div><b>> 0 bytes of data</b></div><div><b>-- Restarting T203 timer</b></div><div><br></div></div><div><br></div></div><div><br></div><div>Thanks,</div><div>Bruce</div><div><br></div><div><br></div>