Hi,<br>I have problem with X100P clone card.I can not force it to work<br>under Asterisk 1.4.27.1 and DAHDI Version: 2.2.0.2. <br>I looked over and over on configuration and could not see any mistakes.<br>Here are relevant configuration files.<br>
<br>/etc/dahdi/system.conf<br><blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">fxsks=1<br>echocanceller=mg2,1<br>loadzone = hu<br>defaultzone = hu<br>
</blockquote><br>dahdi_tool<br><blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">OK Wildcard X100P Board 1 <br></blockquote><br>dahdi_tool (After select select)<br>
<blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">Current Alarms: No alarms ( Should I see OK here instead ? Is it normal ?) <br>Sync Source: Internally clocked <br>
IRQ Misses: 0 <br>Bipolar Viol: 0 <br>Tx/Rx Levels: 0/ 0 <br>Total/Conf/Act: 1/ 1/ 1 <br>
<br> 1 <br>TxA - <br>TxB - <br>TxC - <br>TxD - <br> <br>
RxA - <br>RxB - <br>RxC - <br>RxD - <br></blockquote><br>dahdi_cfg -vv<br><blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">
DAHDI Tools Version - 2.2.0<br><br>DAHDI Version: 2.2.0.2<br>Echo Canceller(s): MG2<br>Configuration<br>======================<br>Channel map:<br>Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)<br>1 channels to configure.<br>
Setting echocan for channel 1 to mg2<br></blockquote><br>lsmod<br><blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">dahdi_echocan_mg2 9992 0<br>
dahdi 193576 2 dahdi_echocan_mg2,wcfxo<br>crc_ccitt 5888 1 dahdi<br>wcfxo 14496 0<br>dahdi 193576 2 dahdi_echocan_mg2,wcfxo<br></blockquote><br>cat /proc/interrupts<br>
<blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">18: 818521 IO-APIC-fasteoi wcfxo<br></blockquote><br>dmseg (after /etc/init.d/dahdi start)<br>
<blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">wcfxo 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18<br>Found a Wildcard FXO: Wildcard X100P<br>
dahdi_echocan_mg2: Registered echo canceler 'MG2'<br>dahdi: Registered tone zone 21 (Hungary)<br></blockquote><br>/etc/asterisk/chad_dahdi.conf<br><blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">
[trunkgroups]<br>[channels]<br>language=nl<br>rxwink=300 ; Atlas seems to use long (250ms) winks<br>usecallerid=yes<br>hidecallerid=no<br>callwaiting=yes<br>usecallingpres=yes<br>callwaitingcallerid=yes<br>threewaycalling=yes<br>
transfer=yes<br>canpark=yes<br>cancallforward=yes<br>callreturn=no<br>echocancel=yes<br>echocancelwhenbridged=yes<br>rxgain=0.0<br>txgain=0.0<br>immediate=no<br>busydetect=yes<br>busycount=4<br>signalling=fxs_ks<br>callgroup=1<br>
pickgroup=1<br>group=1<br>context=pozivi<br>channel => 1<br><br>/etc/asterisk/extensions.conf<br>[agents]<br>exten => 001,1,AgentLogin(1)<br>exten => 001,2,Hangup<br>[pozivi]<br>exten => s,1,Answer<br>exten => s,2,Queue(poziv|tTH)<br>
exten => s,3,Hangup<br><br>exten => 2,1,Dial(dahdi/g1/0641842717)<br>exten => 2,2,Hangup<br></blockquote><br>localhost*CLI> dahdi show channels<br><blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">
Chan Extension Context Language MOH Interpret<br> pseudo default default<br> 1 pozivi nl default<br></blockquote><br>localhost*CLI> dahdi show channel 1<br>
<blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">Channel: 1CLI><br>File Descriptor: 20<br>Span: 1<br>Extension:<br>Dialing: no<br>Context: pozivi<br>
Caller ID:<br>Calling TON: 0<br>Caller ID name:<br>Destroy: 0<br>InAlarm: 0<br>Signalling Type: FXS Kewlstart<br>Radio: 0<br>Owner: <None><br>Real: <None><br>Callwait: <None><br>Threeway: <None><br>
Confno: -1<br>Propagated Conference: -1<br>Real in conference: 0<br>DSP: no<br>Relax DTMF: no<br>Dialing/CallwaitCAS: 0/0<br>Default law: ulaw<br>Fax Handled: no<br>Pulse phone: no<br>Echo Cancellation: 128 taps, currently OFF<br>
Actual Confinfo: Num/0, Mode/0x0000<br>Actual Confmute: No<br>Hookstate (FXS only): Onhook<br></blockquote><br>localhost*CLI> console dial 2<br><blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">
== Console is full duplex<br> -- Executing [2@default:1] Dial("Console/dsp", "dahdi/g1/0641842717") in new stack<br> -- Called g1/0641842717<br> -- DAHDI/1-1 answered Console/dsp<br> << Console call has been answered >><br>
</blockquote><br>,but my mobile does not ring...Nothing happends.<br>I checked wall phone socket with ordinary phone and I can get signal and call, but<br>X100P plugged in at same socket gave me above result.. <br>What's wrong ? Is it broken card or misconfiguration or removed support for X100P in dahdi ? <br clear="all">
<br><br>Thank you,<br>Uros<br>-- <br>Use Free Software <a href="http://www.fsf.org/">http://www.fsf.org/</a><br>-----------------------------------------------<br>Four essential software freedoms:<br>1) To study source code<br>
2) To copy program<br>3) To modify source code<br>4) To redistribute modified program under condition that new user has all 4 freedoms.<br>Richard M. Stallman<br>