<br><br><div class="gmail_quote">2009/12/9 Tzafrir Cohen <span dir="ltr"><<a href="mailto:tzafrir.cohen@xorcom.com">tzafrir.cohen@xorcom.com</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div><div></div><div class="h5">On Wed, Dec 09, 2009 at 05:59:36PM +0100, Olivier wrote:<br>
> Tzafrir,<br>
> Would you say latest trunk (revision 7672) includes a fix for those OctoBRI<br>
> boards ?<br>
<br>
</div></div>The only change was in dahdi-tools . As could be clearly seen from the<br>
output of lspci, wcb4xxp already handles this device.<br></blockquote><div><br>I could successfully get :<br># dahdi_hardware<br>pci:0000:08:00.0 wcb4xxp+ 1397:16b8 Junghanns OctoBRI ISDN card<br># lsmod | grep wcb<br>
wcb4xxp 73060 24<br>dahdi 184936 52 dahdi_echocan_oslec,wcb4xxp<br><br>(Thanks again for that).<br>Unfortunately, I can dial from one port to another. Here is my config (I plugged a cat5 straight cable from port 1 to port 8, port 1 jumper is set to TE, port 8 jumper is set to NT with terminator ON)<br>
<br># cat dahdi-channels.conf<br>....<br>; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER)<br>group=1,11<br>context=remote<br>switchtype = euroisdn<br>signalling = bri_cpe<br>channel => 1-2<br>context = default<br>
group = 63<br><br>....<br>; Span 8: B4/0/8 "B4XXP (PCI) Card 0 Span 8"<br>group=1,18<br>context=remote<br>switchtype = euroisdn<br>signalling = bri_net<br>channel => 22-23<br>context = default<br>group = 63<br>
<br><br># cat /etc/dahdi/system.conf<br>....<br>#<br># Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER)<br>span=1,1,0,ccs,ami<br># termtype: te<br>bchan=1-2<br>hardhdlc=3<br>echocanceller=oslec,1-2<br>...<br>
# Span 8: B4/0/8 "B4XXP (PCI) Card 0 Span 8"<br>span=8,0,0,ccs,ami<br># termtype: nt<br>bchan=22-23<br>hardhdlc=24<br>echocanceller=oslec,22-23<br><br><br>dahdi_tool shows all ports with "Red Alarm" status.<br>
<br>from my dialplan :<br>Dial(DAHDI/g1/0155669909);<br>[Dec 10 11:17:36] WARNING[3129]: app_dial.c:1745 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 34 - Circuit/channel congestion)<br><br><br>
Any idea ?<br><br></div></div><br>