Howdy,<div><br></div><div>I've spent a couple of days writing a new feature for Asterisk that allows to record calls in T1 or E1 PRI lines using Asterisk connected to tapped lines. This means that you don't have to install anything in the PBX's/telco equipment that is going to be monitored, all you need is to install a device like the PN 633 Tap Connection Adapter that is available for example, from Sangoma, however I am sure there must be other vendors out there offering similar devices. Then you need to pull a pair of cables out of the adapter to your monitoring system with Sangoma boards configured in high impedance mode (I don't know if Digium or other vendors boards expose that functionality to users, but you may want to test and find out if works). More detailed instructions can be found at Sangoma's site or my blog:</div>
<div><br></div><div><a href="http://wiki.sangoma.com/sangoma-tap-system">http://wiki.sangoma.com/sangoma-tap-system</a></div><div><a href="http://www.moythreads.com/wordpress/2009/09/26/sangoma-tapping-solution-for-asterisk/">http://www.moythreads.com/wordpress/2009/09/26/sangoma-tapping-solution-for-asterisk/</a><br clear="all">
<br></div><div>The patches are already out there in the bug tracker along with some SVN branches.</div><div><br></div><div><a href="https://issues.asterisk.org/view.php?id=15970">https://issues.asterisk.org/view.php?id=15970</a></div>
<div><a href="https://issues.asterisk.org/view.php?id=15971">https://issues.asterisk.org/view.php?id=15971</a></div><div><br></div><div>I'd love to get feedback in the bug tracker in order to get this feature into Asterisk soon :-)</div>
<div><br></div><div>Also don't hesitate in asking for help with the configuration.</div><div><br>-- <br>Moises Silva<br>
Software Developer<br>Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada<br>t. 1 905 474 1990 x 128 | e. <a href="mailto:moy@sangoma.com" target="_blank">moy@sangoma.com</a><br>
</div>