I managed to do it with a simple forward to the one of our DIDs .... The problem now is that I loose the CID of the original caller ... Is there a way to forward the call with the original caller ID ?<br><br>Thanks!<br><br>
G.<br><br><div class="gmail_quote">On Wed, Jul 15, 2009 at 5:38 PM, John Novack <span dir="ltr"><<a href="mailto:jnovack@stromberg-carlson.org">jnovack@stromberg-carlson.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div class="im"><br>
<br>
Steve Totaro wrote:<br>
> Forwarding a POTS line will not work, it is like a trunk to trunk<br>
> transfer so it is not "free", so the line stays busy.<br>
><br>
> You need to port that number over to the PRI provider.<br>
><br>
</div>That all depends on the POTS provider.<br>
Multiple calls from one POTS number CAN be done, but finding anyone<br>
these days in a business office that can do anything the least bit out<br>
of the ordinary is near impossible, and one may not be willing to pay<br>
for it.<br>
Same with repair - The stock answer - "We checked the line from here, it<br>
has to be your equipment" even with an open pair in their (<br>
unmaintained ) Outside Plant is about all one can expect.<br>
Also, not all POTS lines are portable. In the US some ILEC's are exempt<br>
from the provisions of the 1996 telecom Act.<br>
All above assume this is in the US.<br>
<br>
John Novack<br>
<div class="im">> On Wed, Jul 15, 2009 at 7:41 PM, Gondar Monn <<a href="mailto:gondarmd@gmail.com">gondarmd@gmail.com</a><br>
</div><div class="im">> <mailto:<a href="mailto:gondarmd@gmail.com">gondarmd@gmail.com</a>>> wrote:<br>
><br>
> Thank you for your quick answers!<br>
> @ Brent: rollover is on, I would like to any calls that come on<br>
> 5551234 to another DID, to be able to receive several calls on the<br>
> same number<br>
> @ Don: You are right, I am talking about a specific DID: We have<br>
> an analog line with busy forward setup @ the telco to forward<br>
> calls to 5551234 ... But 2 lines are not enough, so I would like<br>
> to do the same locally: All calls to 555-1234 are forwarded to<br>
> 555-2345 to free up the line .... Does that make sense ?<br>
> To answer your second question: calls to 555-1234 are alerted on<br>
> the first channel available channel. All subsequent calls to the<br>
> DID report busy<br>
><br>
> Again, Thanks for helping me out<br>
> G.<br>
> On Wed, Jul 15, 2009 at 4:21 PM, Don Kelly <<a href="mailto:dk@donkelly.biz">dk@donkelly.biz</a><br>
</div><div><div></div><div class="h5">> <mailto:<a href="mailto:dk@donkelly.biz">dk@donkelly.biz</a>>> wrote:<br>
><br>
> "Rollover" or "hunting" is generally the default on PRIs. It<br>
> sounds like<br>
> Gondar's concern is with a specific DID number (Do multiple<br>
> calls to other<br>
> DID numbers work OK?). I'd wonder about a couple things:<br>
><br>
> Are people dialing '5551234' directly, or are calls being<br>
> forwarded to that<br>
> number? Some call-forwarding schemes will only forward one<br>
> call at a time,<br>
> giving other callers a busy signal.<br>
><br>
> Are you sure that calls to '5551234' aren't being alerted on<br>
> more than one<br>
> channel and your Asterisk configuration is presenting the busy?<br>
><br>
> --Don<br>
><br>
> Don Kelly<br>
><br>
> PCF Corp<br>
> People Come First<br>
> 651 842-1000<br>
> 888 Don Kell(y)<br>
> 651 842-1001 fax<br>
><br>
><br>
> -----Original Message-----<br>
> From: <a href="mailto:asterisk-users-bounces@lists.digium.com">asterisk-users-bounces@lists.digium.com</a><br>
> <mailto:<a href="mailto:asterisk-users-bounces@lists.digium.com">asterisk-users-bounces@lists.digium.com</a>><br>
> [mailto:<a href="mailto:asterisk-users-bounces@lists.digium.com">asterisk-users-bounces@lists.digium.com</a><br>
> <mailto:<a href="mailto:asterisk-users-bounces@lists.digium.com">asterisk-users-bounces@lists.digium.com</a>>] On Behalf Of<br>
> Brent Davidson<br>
> Sent: Wednesday, July 15, 2009 5:37 PM<br>
> To: Asterisk Users Mailing List - Non-Commercial Discussion<br>
> Subject: Re: [asterisk-users] PRI hunt group<br>
><br>
> Gondar Monn wrote:<br>
> > I am having trouble with a DID on a PRI. If there is a call to<br>
> > that DID (let say 5551234) , the next calls get a busy<br>
> signal. How to<br>
> > I go about sending the call to the next available channel ?<br>
> > Thanks!<br>
> ><br>
> > G.<br>
> ><br>
> ><br>
> If the telco is providing the PRI then you need to tell them<br>
> you want<br>
> rollover on the PRI's. Otherwise, anybody calling across the<br>
> PSTN to<br>
> the DID number that is bound to the PRI channel is going to<br>
> get a busy<br>
> signal from the telco if that channel is in use.<br>
><br>
> _______________________________________________<br>
><br>
><br>
><br>
> --<br>
> Thanks,<br>
> Steve Totaro<br>
> +18887771888 (Toll Free)<br>
> +12409381212 (Cell)<br>
> +12024369784 (Skype)<br>
</div></div>> ------------------------------------------------------------------------<br>
<div class="im">><br>
> _______________________________________________<br>
> -- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
><br>
> asterisk-users mailing list<br>
> To UNSUBSCRIBE or update options visit:<br>
> <a href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>
<br>
</div><font color="#888888">--<br>
Dog is my co-pilot<br>
</font><div><div></div><div class="h5"><br>
<br>
_______________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
<br>
asterisk-users mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>
</div></div></blockquote></div><br>