<br><br><div class="gmail_quote">2009/5/7 Jim Dickenson <span dir="ltr"><<a href="mailto:dickenson@cfmc.com">dickenson@cfmc.com</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
I have * 1.6.0.9 with dahdi-linux 2.1.0.4, dahdi-tools 2.1.0.2, libpri<br>
1.4.10 and wanpipe-3.4.1 running on CentOS 5.3 64bit.<br>
<br>
I have 2 ports of the a104d configured for use with PRI lines and 2 ports<br>
configured for use with Adtran Total Access 850 channel banks. The channel<br>
banks have 6 four port FXS cards in them.<br>
<br>
The PRI lines work as expected.<br>
<br>
I can call a phone connected to the channel bank and this works as expected.<br>
<br>
If I pick up the phone connected to the channel bank and dial a digit I<br>
immediately get a fast busy tone. The exceptions is that if I dial<br>
*7<anything> then I can dial these three keys. Nothing of much interest<br>
shows on the * console other then when I hang up the phone this event is<br>
reported.<br>
<br>
If while talking on the phone when someone calls me, I press a key on the<br>
phone connected to the channel bank, the person called hears a faint pop and<br>
then the pressed dtmf tone.<br>
<br>
Any ideas as to what might cause this behavior?<br>
<br>
Thanks for any ideas!<br>
--<br>
Jim Dickenson<br>
mailto:<a href="mailto:dickenson@cfmc.com">dickenson@cfmc.com</a><br>
<br>
CfMC<br>
<a href="http://www.cfmc.com/" target="_blank">http://www.cfmc.com/</a><br>
</blockquote><div><br>Look if your channel bank dont have any fancy dialplan configured. <br></div></div><br>