<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.24.5">
</HEAD>
<BODY>
I have Asterisk 1.4.24 en a Digium TDM410 with EC and with 3 FXO modules.<BR>
<BR>
When I plug one PSTN-line into a FXO-port I am able to receive calls on this line and I can also make calls from an internal SIP-phone to the external PSTN-network.<BR>
<BR>
Still I am bothered about something that appears on the CLI when I do a reload chan_dahdi.so :<BR>
<BR>
<FONT SIZE="2"><I>asterisk*CLI> reload chan_dahdi.so </I></FONT><BR>
<FONT SIZE="2"><I>-- Reloading module 'chan_dahdi' (DAHDI Telephony w/PRI) </I></FONT><BR>
<FONT SIZE="2"><I>== Parsing '/etc/asterisk/chan_dahdi.conf': Found </I></FONT><BR>
<FONT SIZE="2"><I>[Apr 29 16:26:53] WARNING[8927]: chan_dahdi.c:11951 process_dahdi: Ignoring any changes to 'signalling' (on reload) </I></FONT><BR>
<FONT SIZE="2"><I>[Apr 29 16:26:53] WARNING[8927]: chan_dahdi.c:4090 handle_alarms: Detected alarm on channel 1: Red Alarm </I></FONT><BR>
<FONT SIZE="2"><I>-- Reconfigured channel 1, FXS Kewlstart signalling </I></FONT><BR>
<FONT SIZE="2"><I>[Apr 29 16:26:53] WARNING[8927]: chan_dahdi.c:11951 process_dahdi: Ignoring any changes to 'signalling' (on reload) </I></FONT><BR>
<FONT SIZE="2"><I>[Apr 29 16:26:53] WARNING[8927]: chan_dahdi.c:4090 handle_alarms: Detected alarm on channel 2: Red Alarm </I></FONT><BR>
<FONT SIZE="2"><I>-- Reconfigured channel 2, FXS Kewlstart signalling </I></FONT><BR>
[<B>Apr 29 16:26:53] WARNING[8927]: chan_dahdi.c:11951 process_dahdi: Ignoring any changes to 'signalling' (on reload) </B><BR>
<B>-- Reconfigured channel 3, FXS Kewlstart signalling </B><BR>
<FONT SIZE="2"><I>== Parsing '/etc/asterisk/users.conf': Found </I></FONT><BR>
<BR>
What about this "ignoring any changes to 'signalling' ??? It's not a notice, its really a warning...<BR>
<BR>
I would gladly see no warning at all when reloading DAHDI.<BR>
<BR>
<BR>
This is my chan_dahdi.conf (created manually) :<BR>
<BR>
<I><FONT SIZE="2">[trunkgroups]</FONT></I><BR>
<BR>
<I><FONT SIZE="2">[channels]</FONT></I><BR>
<BR>
<I><FONT SIZE="2">language=be</FONT></I><BR>
<I><FONT SIZE="2">busydetect=yes</FONT></I><BR>
<I><FONT SIZE="2">busycount=6</FONT></I><BR>
<I><FONT SIZE="2">callerid=asreceived</FONT></I><BR>
<I><FONT SIZE="2">;threewaycaling=yes</FONT></I><BR>
<I><FONT SIZE="2">transfer=yes</FONT></I><BR>
<I><FONT SIZE="2">; Note that if any of your DAHDI cards have hardware echo cancellers,</FONT></I><BR>
<I><FONT SIZE="2">; then this setting only turns them on and off. There are no special</FONT></I><BR>
<I><FONT SIZE="2">; settings required for hardware echo cancellers; when present and</FONT></I><BR>
<I><FONT SIZE="2">; enabled in their kernel modules, they take precedence over the</FONT></I><BR>
<I><FONT SIZE="2">; software echo canceller compiled into DAHDI automatically.</FONT></I><BR>
<I><FONT SIZE="2">echocancel=yes</FONT></I><BR>
<BR>
<BR>
<I><FONT SIZE="2">;internationalprefix: 00</FONT></I><BR>
<I><FONT SIZE="2">;nationalprefix:0</FONT></I><BR>
<BR>
<I><FONT SIZE="2">context=tel2268191 ; E.U.</FONT></I><BR>
<I><FONT SIZE="2">signalling=fxs_ks</FONT></I><BR>
<I><FONT SIZE="2">group=1</FONT></I><BR>
<I><FONT SIZE="2">channel => 1</FONT></I><BR>
<BR>
<I><FONT SIZE="2">context=tel2362334 ; KMO</FONT></I><BR>
<I><FONT SIZE="2">signalling=fxs_ks</FONT></I><BR>
<I><FONT SIZE="2">group=1</FONT></I><BR>
<I><FONT SIZE="2">channel => 2</FONT></I><BR>
<BR>
<I><FONT SIZE="2">context=telunknown</FONT></I><BR>
<I><FONT SIZE="2">signalling=fxs_ks</FONT></I><BR>
<I><FONT SIZE="2">group=1</FONT></I><BR>
<I><FONT SIZE="2">channel => 3</FONT></I><BR>
<BR>
This is what DAHDI config tells me :<BR>
<BR>
<I><FONT SIZE="2">[root@asterisk asterisk]# /usr/sbin/dahdi_cfg -vvv</FONT></I><BR>
<I><FONT SIZE="2">DAHDI Tools Version - 2.1.0.2</FONT></I><BR>
<BR>
<I><FONT SIZE="2">DAHDI Version: 2.1.0.4</FONT></I><BR>
<I><FONT SIZE="2">Echo Canceller(s): </FONT></I><BR>
<I><FONT SIZE="2">Configuration</FONT></I><BR>
<I><FONT SIZE="2">======================</FONT></I><BR>
<BR>
<BR>
<I><FONT SIZE="2">Channel map:</FONT></I><BR>
<BR>
<I><FONT SIZE="2">Channel 01: FXS Kewlstart (Default) (Slaves: 01)</FONT></I><BR>
<I><FONT SIZE="2">Channel 02: FXS Kewlstart (Default) (Slaves: 02)</FONT></I><BR>
<I><FONT SIZE="2">Channel 03: FXS Kewlstart (Default) (Slaves: 03)</FONT></I><BR>
<BR>
<I><FONT SIZE="2">3 channels to configure.</FONT></I><BR>
<BR>
It keeps telling me that the channels need to be configured, in stead of saying that my channels ARE configured.<BR>
<BR>
<BR>
Thanks for the feedback !<BR>
<BR>
Jonas.
</BODY>
</HTML>