<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.24.5">
</HEAD>
<BODY>
Mike,<BR>
<BR>
thank you for your reply.<BR>
<BR>
However I do not have the option of a DHCP-server. On the network where Asterisk needs to be implemented all is configured statically, so also the IP-phones need to be statically assigned an IP-address. Surely this can not be thé problem...<BR>
<BR>
Greetingz,<BR>
Jonas.<BR>
<BR>
On Mon, 2009-04-13 at 12:28 -0400, Michael van der Stoop wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE>
jonas kellens wrote:
> Hi there,
>
> this is the first time that I'm building an Asterisk-server.
>
> I have compiled Asterisk together with Zaptel on an CentOS 5.3-system.
> Zaptel is for later, when configuring the POTS-line. Now first
> internal communication with SIP.
>
> Thought it would go easier...
>
> I have 2 Grandstream IP-phones : BT-201 and GXP-1200.
>
> These are my settings :
>
> sip.conf :
> /[root@asterisk asterisk]# cat sip.conf/
> /[general]/
> /bindport=5060/
> /bindaddr = 0.0.0.0/
>
> /[BT201]/
> /type=friend/
> /context=intern/
> /host=192.168.4.210/
> /secret=testpaswoord/
>
> /[GXP1200]/
> /type=friend/
> /context=intern/
> /host=192.168.4.211/
> /secret=testpaswoord/
> extensions.conf :
> /[root@asterisk asterisk]# cat extensions.conf/
> /[intern]/
> /exten => 210,1,Dial(SIP/BT201)/
> /exten => 211,1,Dial(SIP/GXP1200)/
> Asterisk CLI shows me :
> /asterisk*CLI> sip reload/
> /Reloading SIP/
> / == Parsing '/etc/asterisk/sip.conf': Found/
> / == Parsing '/etc/asterisk/users.conf': Found/
> / == Parsing '/etc/asterisk/sip_notify.conf': Found/
> /asterisk*CLI> sip show peers/
> /Name/username Host Dyn Nat ACL Port
> Status /
> /GXP1200 192.168.4.211 5060
> Unmonitored /
> /BT201 192.168.4.210 5060
> Unmonitored /
> /2 sip peers [Monitored: 0 online, 0 offline Unmonitored: 2 online, 0
> offline]/
>
> /asterisk*CLI> dialplan show intern/
> /[ Context 'intern' created by 'pbx_config' ]/
> / '210' => 1. Dial(SIP/BT201)
> [pbx_config]/
> / '211' => 1. Dial(SIP/GXP1200)
> [pbx_config]/
>
> I pick up the phone of the BT201 and dial 211... nothing happens.
> I pick up the phone of the GXP1200 and dial 210... nothing happens.
>
> I would love to have your feedback on this. Where could this problem
> be situated ?
>
> I notice (on the Asterisk CLI) that my SIP-phones do not register.
> They have a fixed IP and there account information is set via the web
> interface.
>
> Greetingz,
> Jonas.
> ------------------------------------------------------------------------
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by <A HREF="http://www.api-digital.com">http://www.api-digital.com</A> --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> <A HREF="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</A>
I had the same issue. I set the hosts to dynamic and and explicitly set
their IP's via a dhcp server using their MAC addresses. The phones
registered and all is well.
Regards,
Mike
_______________________________________________
-- Bandwidth and Colocation Provided by <A HREF="http://www.api-digital.com">http://www.api-digital.com</A> --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
<A HREF="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</A>
</PRE>
</BLOCKQUOTE>
</BODY>
</HTML>