Hi <br>I am trying to connect asterisk with a Cisco GW 2600 with E1 pri using a Digium, Inc. Wildcard TE210P dual-span T1/E1/J1 card 3.3V (rev 02),<br><br>Errors:<br><br>[Jan 28 17:32:33] VERBOSE[6182] logger.c: == Primary D-Channel on span 1 up<br>
[Jan 28 17:32:33] WARNING[6182] chan_dahdi.c: PRI Error on span 0: We think we're the CPE, but they think they're the CPE too.<br><br>[Jan 28 17:32:34] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br>
[Jan 28 17:32:35] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br>[Jan 28 17:32:36] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br>
[Jan 28 17:32:37] VERBOSE[6182] logger.c: == Primary D-Channel on span 1 down<br>[Jan 28 17:32:37] WARNING[6182] chan_dahdi.c: No D-channels available! Using Primary channel 16 as D-channel anyway!<br>[Jan 28 17:32:42] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1<br>
[Jan 28 17:32:43] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br>[Jan 28 17:32:44] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br>
[Jan 28 17:32:45] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br>[Jan 28 17:32:51] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br>
<br>please someone help me, <br>rafael<br><br>Configuration details:<br><br>Cisco cisco 2650XM (Version 12.2(15)T14)<br>--------------------------------------------<br>!<br>isdn switch-type primary-net5<br>!<br>!<br>voice call send-alert<br>
voice call convert-discpi-to-prog<br>voice call carrier capacity active<br>voice rtp send-recv<br>!<br>voice service voip <br> fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none<br> h323<br>!<br>!<br>controller E1 1/0<br>
framing NO-CRC4 <br> pri-group timeslots 1-31<br>!<br>!<br>! <br>interface FastEthernet0/0<br> ip address 192.168.12.210 255.255.255.0<br> ip route-cache same-interface<br> no ip route-cache<br> no ip mroute-cache<br>
load-interval 30<br> speed 100<br> full-duplex<br>!<br>interface Serial1/0:15<br> no ip address<br> no logging event link-status<br> isdn switch-type primary-net5<br> isdn incoming-voice data<br> isdn bchan-number-order ascending<br>
no cdp enable<br>!<br>ip http server<br>ip classless<br>ip route 0.0.0.0 0.0.0.0 192.168.12.100<br>!<br>!<br>call rsvp-sync<br>!<br>voice-port 1/0:15<br> echo-cancel coverage 32<br> playout-delay nominal 150<br> playout-delay minimum low<br>
cptone PE<br> bearer-cap 3100Hz<br>!<br>!<br>dial-peer voice 10 pots<br> destination-pattern .T<br> no digit-strip<br> direct-inward-dial<br> port 1/0:15<br> forward-digits all<br>!<br>gateway <br> timer receive-rtcp 5<br>
!<br>--------------------------------------------<br><br><br>* Running Asterisk Version : Asterisk 1.4.23.1<br>* Asterisk Source Version : 1.4.23.1<br>* Zaptel Source Version : 1.4.12.1<br>* Libpri Source Version : 1.4.9<br>
* Addons Source Version : 1.4.7<br><br>pbx*CLI> pri show span 1<br>------------------------<br>Primary D-channel: 16<br>Status: Provisioned, Down, Active<br>Switchtype: EuroISDN<br>Type: CPE<br>Window Length: 0/7<br>
Sentrej: 0<br>SolicitFbit: 0<br>Retrans: 0<br>Busy: 0<br>Overlap Dial: 0<br>Logical Channel Mapping: 0<br>T200 Timer: 1000<br>T203 Timer: 10000<br>T305 Timer: 30000<br>T308 Timer: 4000<br>T309 Timer: -1<br>T313 Timer: 4000<br>
N200 Counter: 3<br><br>pbx*CLI> <br> == Primary D-Channel on span 1 up<br> == Primary D-Channel on span 1 down<br>pbx*CLI> <br><br><br>debug /var/log/asterisk/full:<br>-------------------------------<br>[Jan 28 17:22:03] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br>
[Jan 28 17:22:05] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1<br>[Jan 28 17:22:06] VERBOSE[6182] logger.c: == Primary D-Channel on span 1 up<br>[Jan 28 17:22:06] WARNING[6182] chan_dahdi.c: PRI Error on span 0: We think we're the CPE, but they think they're the CPE too.<br>
<br>[Jan 28 17:22:10] VERBOSE[6182] logger.c: == Primary D-Channel on span 1 down<br>[Jan 28 17:22:10] WARNING[6182] chan_dahdi.c: No D-channels available! Using Primary channel 16 as D-channel anyway!<br>[Jan 28 17:22:12] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br>
[Jan 28 17:22:13] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br>[Jan 28 17:22:14] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br>
[Jan 28 17:22:15] NOTICE[6182] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1<br><br><br><br>/etc/zaptel.conf<br>-------------------<br># Autogenerated by /usr/src/zaptel/kernel/xpp/utils/genzaptelconf -- do not hand edit<br>
# Zaptel Configuration File<br>#<br># This file is parsed by the Zaptel Configurator, ztcfg<br>#<br><br># It must be in the module loading order<br><br><br># Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) <br>
span=1,1,0,ccs,hdb3<br># termtype: te<br>bchan=1-15,17-31<br>dchan=16<br><br># Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" <br>span=2,2,0,ccs,hdb3<br># termtype: te<br>bchan=32-46,48-62<br>dchan=47<br><br># Global data<br>
<br>loadzone = us<br>defaultzone = us<br><br><br><br>zapata.conf <br>------------<br>[channels]<br>language=en<br>context=default<br>switchtype=euroisdn<br>;If you connect to a hicom PBX set your ISDN Numbering Plan Identifier to unknown. <br>
pridialplan=unknown<br>prilocaldialplan=unknown<br>signalling=pri_cpe<br>usecallerid=yes<br>hidecallerid=no<br>callwaiting=yes<br>usecallingpres=yes<br>callwaitingcallerid=yes<br>threewaycalling=yes<br>transfer=yes<br>cancallforward=yes<br>
callreturn=yes<br>echocancel=yes<br>echocancelwhenbridged=yes<br>rxgain=0.0<br>txgain=0.0<br>group=1<br>callgroup=1<br>pickupgroup=1<br>immediate=no<br><br>group = 1<br>channel => 1-15<br>channel => 17-31<br><br>group = 2<br>
channel => 32-46<br>channel => 48-62 <br>#include zapata-channels.conf<br><br><br>zapata-channels.conf <br>-------------------<br>; Autogenerated by /usr/src/zaptel/kernel/xpp/utils/genzaptelconf -- do not hand edit<br>
; Zaptel Channels Configurations (zapata.conf)<br>;<br>; This is not intended to be a complete zapata.conf. Rather, it is intended <br>; to be #include-d by /etc/zapata.conf that will include the global settings<br>;<br><br>
; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) <br>group=0,11<br>context=from-pstn<br>switchtype = euroisdn<br>signalling = pri_cpe<br>channel => 1-15,17-31<br>group=<br>context=default<br><br>; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" <br>
group=0,12<br>context=from-pstn<br>switchtype = euroisdn<br>signalling = pri_cpe<br>channel => 32-46,48-62<br>group=<br>context=default<br><br><br><br><br>