<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi all<br>
<br>
When I call to any mobile and the device is power off the asterisk keep
ringing and I not able to hear the tradicional message saying this
mobile is power off.....<br>
When I call from a normal analogic line I got the message.<br>
Somebody have some suggestion to enable asterisk to identify turn off
devices and pass the message to peer? otherwise when somebody call to
some mobile always think is ringing and not power off.<br>
<br>
thanks<br>
<br>
Asterisk 1.4.22<br>
E1 PRI digital line<br>
<br>
<b>zapata.conf</b><br>
[channels]<br>
; General options<br>
usecallerid=yes<br>
hidecallerid=no<br>
callwaiting=yes<br>
callwaitingcallerid=yes<br>
threewaycalling=yes<br>
transfer=yes<br>
canpark=yes<br>
cancallforward=yes<br>
callreturn=yes<br>
echocancel=yes<br>
echocancelwhenbridged=yes<br>
rxgain=0.0<br>
txgain=0.0<br>
callerid=""xxxxxx<br>
switchtype=euroisdn<br>
signalling=pri_cpe<br>
group=1<br>
context=incoming<br>
pri_dialplan=unknow<br>
prilocaldialplan=unknow<br>
overlapdial=no<br>
amaflags=billing<br>
priindication=outofband<br>
channel=1-15,17-31<br>
<b><br>
zaptel.conf</b><br>
# Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)<br>
span=1,1,0,ccs,hdb3<br>
# termtype: te<br>
bchan=1-15,17-31<br>
dchan=16<br>
# Global data<br>
loadzone = cn<br>
defaultzone = cn<br>
<br>
<br>
<br>
<br>
</body>
</html>